- Location
- Amarillo, TX
BMW has to be filled on premium....
BMW has to be filled on premium....
- Location
- Amarillo, TX
started the build process on making a custom mount for my blackberry playbook to mount it up above my stereo in a way that the 1080p camera can see out the dash, I can use it for navigation, the app that has speedo/gps location, pitch and roll display, the media player, and anything else that I may need/want to do on it. Revision #1 of the mount WILL be done tonight, as late as I have to stay up to get it done, it'll be done before I go to bed, I'm going wheeling tomorrow and want to test it out....
- Location
- Western Massachusetts
Installed my battery tie down finally, cut the j-hooks to the right size this time, haha.
No pics yet 'cause I ran out of daylight, I'll see if I can update tomorrow with a pic.
Sent to you from my very own piece of East Coast paradise.
No pics yet 'cause I ran out of daylight, I'll see if I can update tomorrow with a pic.
Sent to you from my very own piece of East Coast paradise.
- Location
- Smyrna, TN
FINALLY got my CD player installed...pics to come in my build thread.
- Location
- Bloomington, Indiana
Over the last couple of days I replaced a brake light and did the fog-light bypass mod, I also mounted the fire extinguisher in the back cargo area and have been organizing tools and Off Road gear. It has been pretty productive couple of days. I also stuffed my wet box and will be picking up the locking handle tomorrow.
Got my first oil analysis back from www.blackstone-labs.net. Said "This is a nice looking engine for 193K miles"
- Location
- Bowling Green, KY
Used my air compressor to fix a guys flat at school in the middle of a small snow storm...broke the gauge off the compressor but it didn't work anyway. Also got some complements from guys that didn't know I was the owner of "a sweet truck" he also asked what I had done to it. I mentioned PML, Rims, CB, Lights, Tires. His answer was really no shocks? Haha he also thought it was a "racing rig", guess he meant like baja or rally?
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
Over the last couple of days I replaced a brake light and did the fog-light bypass mod, I also mounted the fire extinguisher in the back cargo area and have been organizing tools and Off Road gear. It has been pretty productive couple of days. I also stuffed my wet box and will be picking up the locking handle tomorrow.
Link to locking handle?
Sent from my brain.
- Location
- Western Massachusetts
Ordered some LED bulbs from Super Bright LEDs for my map lights and dome lights, went with amber to match my interior amber strobes.
- Location
- Bowling Green, KY
Installed new radiator, tires rotated, balanced, alignment, changed the oil and transmission fluid, and changed drive belt. Now that is done, no more worrying about my transmission going out for a while. 
- Location
- Idaho!
You're kidding! They make in green now, too!
Or did they custom build just for you??
Oh yes they make them! Found it at cbworld.com
here is a pic of it all installed:
Sent from my PantechP8000 using Tapatalk
- Location
- West Haven, UTAH
That is so perfect for your rig!
Nice touch.
Nice touch.
- Location
- Carlisle, Iowa
Ive done nothing but looked at it... lol
Waiting for tie rods, and adjusters to come in... I got lucky and nothing has shipped on time.. been like this for a week
Waiting for tie rods, and adjusters to come in... I got lucky and nothing has shipped on time.. been like this for a week
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
Ive done nothing but looked at it... lol
Waiting for tie rods, and adjusters to come in... I got lucky and nothing has shipped on time.. been like this for a week
I'm assuming you have another car as a DD?
- Location
- Carlisle, Iowa
Yep my trusty 1989 s15 gmc... the xterra was retired as a dd last september
- Location
- Conroe, TX
Ive done nothing but looked at it... lol
Waiting for tie rods, and adjusters to come in... I got lucky and nothing has shipped on time.. been like this for a week
All you need is a horse. Problem solved... NEXT!...
I think your the only one who could pull that off Fink.
- Location
- Amarillo, TX
nah, I could easily do the horse thing....I'm good like that. I've got the hat, the boots, and the jeans
- Location
- Winlsow Twsp, NJ
Just ordered 4x4parts low pro bump stops and another rear output shaft seal. Mines still leaking so what the heck maybe the seal i got last week was bad. Guess i'll find out.
- Location
- Amarillo, TX
found out saturday that with no sway bar on the back, I can tuck the rear tire tight enough and deep enough to rub my tires on the inside of the fender....never done that before....good to know!
jmnielsen
Need Bigger Tires
- Location
- Lincoln, NE
Lift time?
- Location
- Rancho Cucamonga, CA
No more snorkel (or a raised air intake), and no more stinger:
Made a cool air intake vent:
Detail of air intake vent:
Ya its a Pep Boyz custom brake pedal
Made a cool air intake vent:
Detail of air intake vent:
Ya its a Pep Boyz custom brake pedal
- Location
- Smyrna, TN
Much better without the stinger.
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
No more snorkel (or a raised air intake), and no more stinger:
Made a cool air intake vent:
Detail of air intake vent:
Ya its a Pep Boyz custom brake pedal
Downsizing?
Sent from my brain.
- Location
- Rancho Cucamonga, CA
Yeah, I don't know why I did it - I get bored I guess
- Location
- Bowling Green, KY
I think it looks better, IMO I don't like snorkels at all unless is the low profile ones that come out right by the windshield and are only about a foot high
- Location
- Dayton, OH
No more snorkel (or a raised air intake), and no more stinger:
Made a cool air intake vent:
Detail of air intake vent:
Ya its a Pep Boyz custom brake pedal
Dah! I loved the stinger! But I guess to each his own
- Location
- Tucson, AZ
Shrock rad skid and BTF diff cover were just placed on order!
- Location
- Pearl, MS
Just got my new license plate in.
- Location
- Bowling Green, KY
what tires are you running?^
- Location
- Pearl, MS
Federal Couragia MT in the 33X12.50 R15 flavor.
- Location
- Woodstock, GA
Finally (ahem, RyanDavenportStopBuggingMe!!!) - new shoes!!
It were getting past time.... was starting to spin the old ones.
It were getting past time.... was starting to spin the old ones.
- Location
- Woodstock, GA
Now just need to unwind these a bit more, and I think I can go out and play again.... (swear I can't remember if I already posted this one - so sorry if it's old news!!)
- Location
- Woodstock, GA
Dude, you are SO right and, how lucky -- I SO have that covered!!! Luke, I'll even deliver. What day and what time can I drop one off??
- Location
- Pearl, MS
Nice!
- Location
- SW OK & formerly Eastern NM
Finally (ahem, RyanDavenportStopBuggingMe!!!) - new shoes!!
It were getting past time.... was starting to spin the old ones.
Now just need to unwind these a bit more, and I think I can go out and play again.... (swear I can't remember if I already posted this one - so sorry if it's old news!!)
That's freaking sweet! Is it weird I'm jonesing for my tires to wear out so I can buy new ones?
- Location
- Western Massachusetts
Installed amber LEDs in my dome lights today, map lights (and pics) tomorrow.