Project: Unicorn

Prime

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Uhm.......if you get high centered 2 things:

1. You were doing something VERY wrong
2. Lack of a winch won't be your only problem.
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
I generally get bored so I throw myself in bad spots. That's when I end up high centered. Usually it's just a tug off with a strap but if I was alone a winch would be nice.
 
Xado89

Xado89

Skid Plates
Location
Ocala, FL
You have to paint the shaft purple to match the hubs, haha. Those MTR's look sooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo much better than those bald ass scrubby iroks you had. I see you brought the bumper back to black, didn't like the sand tone?
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
Driveshaft's been painted black already and for me to paint it purple I'd have to repaint with like 4-5 coats of white first. It's hard to do the purple metal cast.

Also the sand wasn't going to match anything else so I just repainted black. A long with a lot of other things.
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
Did some wheeling this weekend. Trying to get video and pictures from people now. This is the first video I got of the first hill we hit. It was slick but not that bad, after the surface was broken by the first 4 jeeps I got to just crawl in 1st and 4 lo. More to come.

http://youtu.be/YejEyYjdqG4
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
Soooo... I did this.


Then this..


Then all of a sudden this thing fell off..


So I decided I'd take this off.


Then I lowered it.



Looks good. Now I need to cut.



I also decided the ugly welds on my bumper needed to go. Not finished paint job but it's been raining and I didn't want it to rust.


Smooth! Need to bedline and install it back on.

That's it for now.
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
I'll help you out. Took me like an hour to actually do the body mount stuff. Longer to figure out why it wouldn't lower back down on the front 2 mounts. Was actually kind of nice using my high lift. Did the 3 rear sets then lowered it and did the front 2 using the sub frame on the front.
 
Roadwarrior

Roadwarrior

Titan Swapped / SAS'd
Founding Member
Location
Probably in class..
I don't think it looks that bad. I want to remove the rear plastics and trim that metal. In the back. Weld the rest and bedline to protect then build a rear bumper to protect the now slightly weaker section of body
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
Backed out of the parking spot and heard a crack when I went to turn. So I put it back on pavement and turned the wheel while my buddy looked and he saw the drag link moving up and down on the heim. Kind of sucks but it's not THAT big of a deal.
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
I took the one on the door out by slamming the door. The one on my rocker won't be easy to get out. The bottom of the door is completely bent over the seal. I also need a new tail light.
 
SASXA

SASXA

First Fill-Up (of many)
Location
Ormond Beach Florida
Yeah I had rockers on. Yesterday was ment to be a "I'll just go easy on it" When I saw the rock garden at B Pit I was like "I can do that without too much effort." Nope.. It was slick and I slid into a rock. Whoops.
 
You must log in or register to reply here.
Top