- Location
- S.Subs of Chicago, IL.
Bucksnort??? A supplier? if so where I can always look at another one.
Last edited:
Rear Bumpers
- Thread starter Lucky_lefty
- Start date
Bucksnort??? A supplier? if so where I can always look at another one.
- Location
- NW burbs of Chicago
bucksnort is a NewX member up in Madison, WI. He orders materials and gets a shop to weld some bumpers together and he ships them out to member- kinda like the middle man.
Last edited by a moderator:
- Location
- S.Subs of Chicago, IL.
Thanks for the contact info...pm sent.
Last edited by a moderator:
- Location
- Rancho Cucamonga, CA
I am one of the blessed few who had Dave (Maxterra) fab me one of his works of art:
Build Picts:
Finished Picts:
Installed and in use!:
SPECS:
# Frame Mount offset for 3" Body lift.
# Tire swing mount for 35" tire
# High lift jack mount
# CB antenna mount
# Recovery points
# Flush mount receiver hitch
# 7-pin trailer connector mounted next to receiver hitch
# Hidden safety chain hook bars
# Gloss black powdercoat finish. Media blast prep and prime coat for maximum paint adhesion
and NO six month wait!!!!!! I am extremely STOKED
Build Picts:
Finished Picts:
Installed and in use!:
SPECS:
# Frame Mount offset for 3" Body lift.
# Tire swing mount for 35" tire
# High lift jack mount
# CB antenna mount
# Recovery points
# Flush mount receiver hitch
# 7-pin trailer connector mounted next to receiver hitch
# Hidden safety chain hook bars
# Gloss black powdercoat finish. Media blast prep and prime coat for maximum paint adhesion
and NO six month wait!!!!!! I am extremely STOKED
- Location
- S.Subs of Chicago, IL.
Looks nice, where is the CB mount and is it in an optional position? I have a specific spot I want one.
- Location
- Rancho Cucamonga, CA
- Location
- S.Subs of Chicago, IL.
if?!?!? Whatchutalkinboutwillis? :wut:
- Location
- Rancho Cucamonga, CA
I think he took a break from building bumpers for a while to spend more time with family. Can't fault him for that. But its a shame cause he's such a great craftsman
Holy hell! Looking at this on my phone did not do it justice!
If he makes them again I'm sure he'll put it wherever you want
Totally need that but in reverse for me ladder!
- Location
- S.Subs of Chicago, IL.
The problem that I'm facing w/ all these great looking bumpers is that no one makes them for GEN1's anymore. OR as in this case he no longer makes them at all. Family comes first... I'll be the first one to stand behind a man that does that over anything. BUT DANG PEOPLE...can you make just 1 more for old times sake PLEEEEEEEEASE !!!!
- Location
- S.Subs of Chicago, IL.
Thanks for the info...but he only makes these for GEN2's.
- Location
- Denver, CO
Sorry man. I'm fairly local to him, so shipping wasn't an issue for me. Mine was also the first one he built and had to drive down there a few times. I had mine done in pieces. First the actual bumper and then later the tire carrier. The Skid Row on AC's site with just the bumper really isn't that bad of a deal either. You can always get that and have someone custom fab the tire carrier for you.
- Location
- NW burbs of Chicago
Yeah i figured he only does 2nd Gens. Are you going to the Meet-N-Greet in February? You can meet up with my boyfriend then (ChettaCheez on thenewx) and possibly convince him to look into it for this summer when he is back in town from school.
- Location
- S.Subs of Chicago, IL.
Didn't know there was one, but yeah I'll try and go. Date/place/time is all I need. Is it on thenewX?
Last edited:
- Location
- Rancho Cucamonga, CA
I sure will. Dave's actually in Utah
- Location
- Dickinson, TX
You should tell him he needs to be on XN or you just won't be able to continue a seperated relationship like this anymore.
- Location
- NW burbs of Chicago
- Location
- STL
haha one Xterra forum is enough for him. He is a Jeep guy
he sounded like the perfect man up until that post. lol
- Location
- NW burbs of Chicago
- Location
- Hainesville IL
those are some great rear bumpers, and i cant wait to get mine, but let me just say this about all your Xterras..... DAT @$$!
ChiXterra
Wheeling
- Location
- Northern Illinois
I am one of the blessed few who had Dave (Maxterra) fab me one of his works of art:
Build Picts:
Finished Picts:
Installed and in use!:
SPECS:
# Frame Mount offset for 3" Body lift.
# Tire swing mount for 35" tire
# High lift jack mount
# CB antenna mount
# Recovery points
# Flush mount receiver hitch
# 7-pin trailer connector mounted next to receiver hitch
# Hidden safety chain hook bars
# Gloss black powdercoat finish. Media blast prep and prime coat for maximum paint adhesion
and NO six month wait!!!!!! I am extremely STOKED
I want! I've searched for a rear bumper for a long time, and that may be one of the nicest I've ever seen. It looks like a true work of art...
- Location
- West Haven, UTAH
Thanks for the mention, Oz.:smile:
I'm back and building quite a few rear bumpers again for the 2nd gens. Had to quit doing them last year due to working 60 to 80 hrs/wk most of the year. Now back to pretty much 40 again, so time available.
Hope to have a front bumper out this summer after I get a new "project" out and tested first.
Here's the latest revision of my standard rear unit:
Light as possible, but strong. LED license plate light included. For std & 2" Body lift mounting.
On the full units, they now have a different license plate bracket, but I can't find a pic of it right now.
If you have any questions or want the spec/price sheet, email me at maximumdesign@comcast.net
Thanks for looking!
Dave
I'm back and building quite a few rear bumpers again for the 2nd gens. Had to quit doing them last year due to working 60 to 80 hrs/wk most of the year. Now back to pretty much 40 again, so time available.
Hope to have a front bumper out this summer after I get a new "project" out and tested first.
Here's the latest revision of my standard rear unit:
Light as possible, but strong. LED license plate light included. For std & 2" Body lift mounting.
On the full units, they now have a different license plate bracket, but I can't find a pic of it right now.
If you have any questions or want the spec/price sheet, email me at maximumdesign@comcast.net
Thanks for looking!
Dave
- Location
- Ontario, Canada
That bumper is awesome
ChiXterra
Wheeling
- Location
- Northern Illinois
Email sent, Dave.
- Location
- Conroe, TX
Nice design all around. You lucky second Gens.
Sent using telepathy.
Sent using telepathy.
- Location
- NW burbs of Chicago
We are the cool kids hehe
- Location
- Hainesville IL
only because of the rear locker that comes stock haha!We are the cool kids hehe
ChiXterra
Wheeling
- Location
- Northern Illinois
To me, it sounds like someone with a 1st Gen needs to get one built my Dave, then he'd have those measurements... I mean, someone has to live close by!
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
Why is the hitch tucked in on the bumpers with spare tires and the ones that don't have spare mount, the hitch extends out?
Thanks for the mention, Oz.:smile:
I'm back and building quite a few rear bumpers again for the 2nd gens. Had to quit doing them last year due to working 60 to 80 hrs/wk most of the year. Now back to pretty much 40 again, so time available.
Hope to have a front bumper out this summer after I get a new "project" out and tested first.
Here's the latest revision of my standard rear unit:
Light as possible, but strong. LED license plate light included. For std & 2" Body lift mounting.
On the full units, they now have a different license plate bracket, but I can't find a pic of it right now.
If you have any questions or want the spec/price sheet, email me at maximumdesign@comcast.net
Thanks for looking!
Dave
Looks great man! Also pmd with questions
- Location
- West Haven, UTAH
^^^. Not having the hitch sticking out and hitting you in the leg while accessing the rear cargo area, and better departure angle is the typical requested model on the tire carrier unit. Doing so negates use of the stock spare tire location, though.
On the standard bumper, the hitch had to protrude out so you can keep the spare tire underneath. I've also added more room on the back of the bumper for larger spare tire size underneath.
On the standard bumper, the hitch had to protrude out so you can keep the spare tire underneath. I've also added more room on the back of the bumper for larger spare tire size underneath.
- Location
- West Haven, UTAH
Forgot to mention on the full bumpers, I've added the option of a set of 2.5" LED backup lights flush in the bumper face.
Will have some pics of those as soon as I get a couple bumpers back from the coater.
Will have some pics of those as soon as I get a couple bumpers back from the coater.
- Location
- West Haven, UTAH
I'll have to look at mine as I have a ladder on RH side and see if it would clear behind the tire carrier.
anyone have the skidrow i know davcos does. question is has anyone just ordered the rear bumper than the tire carrier after? and is it worth it or just doing it all at once. i'm having trouble finding another dr rim so didnt want to order my tire carrier till i had one to match.
X-Territup
Test Drive
- Location
- Nevada
