- Location
- Denver Adjacent
Wow. Good luck on your venture and keep in touch!
- Location
- San Antonio, TX
Completed my 2 x dual USB ports and Roof Basket install:
Setting the basket back as far as it will go left just the right amount of room for access to the wet box handle.
JG
Setting the basket back as far as it will go left just the right amount of room for access to the wet box handle.
JG
I am not allowed to import my X. I certainly wanted too though. I'll keep in touch for sure. Moving to the Philippines. Time for retirement. But have the X sold already.I wish you well in your new endeavor [ be it work or just a life change ]So not going to ship the X over
- Location
- Burtonsville, Md
Nice !! And my favorite color too !! Lol
Now your ready for a mud flap and nurf bar delete .
Lazerrred
Bought an X
Nice.
She looks new !!
- Location
- Denver Adjacent
Dropped it at the dealership.
cbrianroll
Bought an X
- Location
- Washington
Nothing....BOOOOO...bern working on a Subaru Project...
I did however order a bearing for the distributor Last night though. Need to sell the motorcycle so I can get some tires lol.
I did however order a bearing for the distributor Last night though. Need to sell the motorcycle so I can get some tires lol.
- Location
- Denver Adjacent
They're not saying boo! They're saying, boo...urns! Hahaha
- Location
- Burtonsville, Md
Since I put the 2.5 inch lift on the front I've never had the camber set properly since the boot's on the SPC upper's was rubbing so today I took the grinder to the bucket's , smoothed out the edge's then hit it with some rustoleum and installed new boot's and retaining ring's !! Now for a proper alignment 
- Location
- Rochester, NY
I’d say you’ve got that bucket aligned perfectlySince I put the 2.5 inch lift on the front I've never had the camber set properly since the boot's on the SPC upper's was rubbing so today I took the grinder to the bucket's , smoothed out the edge's then hit it with some rustoleum and installed new boot's and retaining ring's !! Now for a proper alignment
- Location
- Burtonsville, Md
Lol ; I just looked at the pic's and couldn't remember if I pulled the paper towel out from inside the bucket so I had to run outside ! Lol I Figured it would stop the metal piece's/shaving's from getting up on top of the coil/spacer also covered up the brake's/rotor's .
- Location
- Burtonsville, Md
Finally the alignment is where it need's to be. Happiness declared !!
- Location
- Virginia
Awesome... now let's go bounce it off some rocks!
kryter
First Fill-Up (of many)
- Location
- Aurora Colorado
Monday ,,,M205 going in for a rebuild, new 4.11 yukon gears and a arb locker ........... Exciting
kryter
First Fill-Up (of many)
- Location
- Aurora Colorado
ps running kingston to yankee hill sunday 10am rollinsvile
- Location
- McMinnville, Orygun
Went to install a clean K&N Air Filter. Open Air box. Remove Old Filter.. What do I see!!.. ( Bleeping ucking Mice!!! )
Will add Mice traps again.. grrrrrrr
Dig out shop Vac.. Clean Install new filter.. Wash old filter Toss in sun to dry... BEER thirty Yet??
Will add Mice traps again.. grrrrrrr
Dig out shop Vac.. Clean Install new filter.. Wash old filter Toss in sun to dry... BEER thirty Yet??
cbrianroll
Bought an X
- Location
- Washington
Yay! Idle is smooth now!! Got new distributor Bearing installed. Bearing wasnt really sloppy but had a flat spot or something where it would catch a bit.
- Location
- Burtonsville, Md
- Location
- Virginia
Installed OEM exhaust flange gaskets today. Had no idea they were actually really good. They’re layered metal and tapered so they’re slightly thinner at the studs and wider where there’s more likely to be a leak.
The process was brutal. After trying and failing to do it without dropping the exhaust, I ended up having to take the whole thing out. But it’s done now, and holding my hands around all the connections with the wife revving the engine, no leaks.
The process was brutal. After trying and failing to do it without dropping the exhaust, I ended up having to take the whole thing out. But it’s done now, and holding my hands around all the connections with the wife revving the engine, no leaks.
- Location
- Covington, Va
Yeah, they're far superior to any aftermarket ones I've tried.
- Location
- Rochester, NY
I LOVE when I’m not the guinea pig tester. I’m glad I didn’t get gaskets yet. Now that you’ve done it twice, any quirks with alignment that you noticed in assembly?
- Location
- Virginia
No alignment issues at all. I followed the written instructions that came with it (AFE Hi Tuck). When we did a buddy’s we had to expand out the pipe that went over the other pipe. On mine they were loose and didn’t have to.
- Location
- Denver Adjacent
When you need hard parts, buy OE. I thought this was gospel.
- Location
- Virginia
Normally. But stock was a super thin single layer copper gasket. Threw me off.
- Location
- Rochester, NY
Umm...... yeah. Yeah.
- Location
- Covington, Va
Yup.... I did that about 6 months ago.....
- Location
- Virginia
Sweet. That’s really detailed for a shirt. Is that screen printed or something else?
- Location
- Virginia
Overload leaf delete complete
MiggieX
Bought an X
i dunno i got it made from custom ink, not sure on the process. oh yeah the art image was done by someone on instagram and then i used the png file to make the shirt
- Location
- Virginia
Some interesting stats: each overload leaf is just over 36” long, over 1/2” wide in the center, and weighs a whopping 13lb, 11oz.
Combined over 27 pounds removed.
- Location
- Rochester, NY
Damn. You and I should combine our overload leaves together and have MAXTERRA make someone a nice Rear plate bumper
MiggieX
Bought an X
welp just purchased the diode dynamics fog lights, cant wait for them to come in. they are at 18,000 candela, time to start unleashing the power of the suuuuun
I got the "SS3 LED Fog Light Kit-SAE-Yellow SAE/DOT Fog, MAX"
www.diodedynamics.com
I got the "SS3 LED Fog Light Kit-SAE-Yellow SAE/DOT Fog, MAX"
SS3 LED Fog Light Kit for 2005-2015 Nissan Xterra
Upgrade the fog lights on your Nissan Xterra with our LED Pod Fog Light Kit! Plug and play installation, with no modification needed!
www.diodedynamics.com
- Location
- Virginia
That’s awesome. I have the Sport and they made a huge difference. Kinda wish I did the Pro. Can’t wait to see the Max output though!welp just purchased the diode dynamics fog lights, cant wait for them to come in. they are at 18,000 candela, time to start unleashing the power of the suuuuun
I got the "SS3 LED Fog Light Kit-SAE-Yellow SAE/DOT Fog, MAX"
SS3 LED Fog Light Kit for 2005-2015 Nissan Xterra
Upgrade the fog lights on your Nissan Xterra with our LED Pod Fog Light Kit! Plug and play installation, with no modification needed!
Fixed it up.. was broke down, didn't know why, thought it was a code camshaft position malfunction, replaced the dizzy, no fixxy, replaced the starter, fixxy! Also fixed bumper up. Was bent to hell from a hit. Was going to take off and replace inner bumper but found that no need, just loosen inner bumper from the top and straighten it out . Did that and it's all good , now just need restore plastic faded ... Need a torch... Will get to that maybe...
Btw, the car runs a lot better with the new dizzy...get a good dizzy if your Xterra is sluggish...had a shiatty dizzy ,,cheap.. it ran slooww... Now it's ok
Btw, the car runs a lot better with the new dizzy...get a good dizzy if your Xterra is sluggish...had a shiatty dizzy ,,cheap.. it ran slooww... Now it's ok
- Location
- Colorado Springs
Dizzy???? WTF is "dizzy"?
- Location
- Covington, Va
Distributor
- Location
- Denver Adjacent
It's when you drink too much.