- Location
- Ontario Canada
Morning
The Greater Post Whore Society - Volume 3: New Year, New...Get Bent
- Thread starter Prime
- Start date
- Status
- Location
- Glenside, PA
Body lifts are stupid expensive
- Location
- Denver Adjacent
Negative
- Location
- Glenside, PA
$200 for some bolts and plastic
- Location
- Western Massachusetts
Home Depot has pressure treated 4x4's for less than $10. Cut your pucks out of the post. Bolts are not required, the weight of the vehicle body will hold it down just fine. Any movement you do experience will just allow for more clearance.
- Location
- Western Massachusetts
Trust me, I'm a complete ass hat. I know what I'm talking about.
- Location
- Allen, Texas
Morning beeches
edit: that word isnt edited? Odd, ill fix my post
edit: that word isnt edited? Odd, ill fix my post
- Location
- Denver Adjacent
I'm fine with that word, bitches.
- Location
- Denver Adjacent
And an extended rad hose. Don't forget that.
You can piece it together yourself for less But it's just a question of what bolts you need.
- Location
- Denver Adjacent
- Location
- Glenside, PA
I mean, I have a whole 5 gallon bucket full of hockey pucks in my garage.
- Location
- Glenside, PA
I know. Just felt like bitching
- Location
- Allen, Texas
Good to know bitches
- Location
- Denver Adjacent
Hockey pucks and a drill press. Make your own spacers. I've seen it done before.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Morning
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Well ufck. Garage door opener is completely ufcked.
What is ufcked in it, what brand and year is it. And what size is your garage door.
- Location
- Denver Adjacent
Old craftsman ½hp chain drive lifting a wood/glass 2-car door. The worm gear on the drive motor chewed all the teeth off of the drive gear on the axle.
- Location
- Allen, Texas
People die fckin with those doors. Best o luck to yas
- Location
- Western Massachusetts
Dibs on the Xterra.
- Location
- Denver Adjacent
Nah. I'm not doing anything where I'm gonna ufck with an open door or the load spring. I aint skeered.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
If it is older that 10 years I recommend replacing the operator. But you can get a gear kit to replace the internal nylon gear. If you are getting new there is a new residential operator from liftmaster (model WLED) with build in led lighting and smart home compatible.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Also make sure the door runs nice by hand. As long as it is running nicely, installing and setting up the new operator is straight forward.
- Location
- All over PA
Kronos out of surgery. Tumors removed. One was just a fatty tumor. Other being sent out for biopsy.
- Location
- Denver Adjacent
Oh yeah. I'm replacing the entire thing. Chamberlain 1.5hp belt drive with myQ built in.
- Location
- Denver Adjacent
I thought about doing a direct drive, but didn't want to spend the money.
- Location
- Hainesville IL
hecking heck *sips coffee*
thecoalition
Call me Daddy
- Location
- Richmond, Va
At this point you may as well just upgrade to the silicone hoses Angel offers since you have to dump the rad anyway.
Why don't you peice one together and make a list and do a write up on it.
They cut our hours at work again down to 40 hour weeks. The good thing is that we suggested letting us work 4 10s and have 3 days off. The president of the company is on board with it he said he would need to talk to others in the office about it.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Good choice. Get a 1 piece boom if possible. They flex less and run quieter.
- Location
- All over PA
It’s funny. I had 2 tumors and a skin tag removed from my best friend today and it cost me 1k. If it would have been on any scum bag piece of shiat human it would probably cost 10k+ and come out of my taxes because the whole health care system is a ufcking joke.
Tumors suck we had to get one removed from Luna's leg and left a 3" long scar. The shiatty thing is that the vet did not take the whole thing out because the vet did not want to maim her so it will probably come back.
That's a lot of cash, we paid $250 to get Luna's removed.
- Location
- Glenside, PA
Because lazy
- Location
- Glenside, PA
Best wishes for doggo.
- Location
- Denver Adjacent
I didn't know that was a thing. I will investigate
- Location
- Denver Adjacent
I wanted another dumb garage door so it'd be easier to tie into my home automation system. Now I have to buy another $125 piece of software to make it work. But I don't have to run any wires.
- Location
- All over PA
Daredevil canceled. The Disney streaming better pick this ufcker up or im going to be pissed.
- Status