Bigger..lockier.Gone

civicjoe

lone wolf mod
Founding Member
Location
Nevada
MAXTERRRA Bumper!
attachment.php

Mad props to Dave on this really happy with it and couldn't be happier with the customer service from this guy! If you're thinking about getting one do it! Dave is a do right guy had this thing installed in a short time and a lot of bs'ing.
More pics to come! Later


Sent from the Nighthog mobile command unit.
 

Attachments

  • ImageUploadedByTapatalk1360982441.826138.jpg
    ImageUploadedByTapatalk1360982441.826138.jpg
    29.6 KB · Views: 139
Last edited:

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Ok I took these the other day just to get out and use my new lens and get familiar with it
img5778ok.jpg

img5777qe.jpg
 
Last edited:

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Got out a little today went a up a hill Id never explored and got to a place where I had to turn around, wasnt about to try and go up a 70º 800' climb, these are not photo of such an attempt
img5785h.jpg

img5783uj.jpg

img5779r.jpg
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Nightlights! Dually Vs Piaa 510

Ok so I went out tonight and finally got around to getting some solid comparison shots of lights.
First up
Headlights
headlightsi.jpg

Headlights and ARB Fogs
arbfog.jpg

Headlights and PIAA 510 Driving
piaa510.jpg

Headlights and Dually Spots - didnt realize the focus on this shot is off compared to the others
duallyspot.jpg

Headlights and Dually Floods
duallyflood.jpg

Headlights and Dually Spots & Floods
duallycombo.jpg


I got a few other shots, but im super happy with my Rigids, with them on its almost like driving in the day time at least with the road area of the truck. I will most likely replace my piaas with either a bar or more duallys, they are very much worth the money, might even spring for the d2 which is brighter based upon the rigid website but i dont doubt they are as there are 2 extra leds in them.
 
Location
MOORPARK
Nice.. I just mounted a D2 and a regular Dually spot on the official ORPP moto and i will say that the D2 is really nice.. It throws an amazingly good light pattern!

Sent from my LG-E970 using Tapatalk 2
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
I bet i really should have gone with the d2s i keep wondering what im missing without them, but ugh the price!
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
And then there was a ladder where there once was not...
73393899460657369415667.jpg

Well not on that side anyway
 
Last edited:

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Thanks guys!
here some more shots of tonights laddering event.
photo2tns.jpg

new sticker alert! Creepy did this up xmas 2011 for secret xer and today it clicked, this can go here!
photo4qh.jpg
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
updated it op a little bit as well, more to come just a little something when ever it shows up in the mail.
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Well Blue Torch Fab is having a sale so i just ordered my rear diff cover! My wife isnt going to be happy but its like getting free shipping, so i saved about 20 bucks
 

drbandkgb

Titan Swapped / SAS'd
Founding Member
Hey Joe... Which over did you get? I can never remember which axel its for.. 2009 X AT here
 

metzican

Suspension Lift
Location
Lafaytte, la
2005-2013
Front Diff:
180 Everyone has this stock
M205 If you put a Titans Front diff in your X doing some form of a titan swap. Note not all Titan swaps have one.

Rear Diff
Manual Transmission = M226
Automatic non OR = C200
Automatic OR = M226

Gear Ratio Stock
Automatic non OR = 3.13
Automatic OR = 3.54
Manual non OR = 3.36
Manual OR = 3.69

I believe this is correct
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
yeah sounds about right, dont know about the ratios, not my expertise there but sounds about right
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Finally got around to doing some things, almost a year later i finally mounted my power tank in cargo bay and ran a new cb line
nzcb.jpg

and got some new creepy art and cleaned up and replaced some stuff and installed the new
9ws8.jpg

qvs7.jpg

ca0m.jpg
 

rokdaddy

Wheeling
Founding Member
Location
New Mexico
That garage cleaned up nicely... you finally have your mad scientist lab/man cave. All you need now is heat and a beer fridge.

I like your net too. I need to get something like that before I run Steel Bender again.


-Rok
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
That garage cleaned up nicely... you finally have your mad scientist lab/man cave. All you need now is heat and a beer fridge.

I like your net too. I need to get something like that before I run Steel Bender again.


-Rok

That's only the car portion! Lol! Still got a mess in the third bay, too many projects at once, and I've got the beer fridge need the heat!!


Sent from the nighthog mobile command unit.
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Thanks guys it's really filthy! I was going to wash it yesterday but no can do with 70mph winds


Sent from the nighthog mobile command unit.
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
Dismantled the cargo bay like 75% of it, found where it would fit Nice enough drill and secured with fender washers and nuts and bolts, it should be good to go back there, the only way it's coming off is if that entire panels breaks loose and as much of a bear as it was to get loose it should be just fine


Sent from the nighthog mobile command unit.
 

NMTerras

Suspension Lift
Location
New Mexico
Dismantled the cargo bay like 75% of it, found where it would fit Nice enough drill and secured with fender washers and nuts and bolts, it should be good to go back there, the only way it's coming off is if that entire panels breaks loose and as much of a bear as it was to get loose it should be just fine


Sent from the nighthog mobile command unit.

Yeah that's what I figured. My issue is I have removed that panel so many times now (its where all my lights and locker wiring is run) I don't think it's that solid. At this point I am looking at fabricating a metal rack to go in the channels (like Kumas old one but without the drawer) and that includes a PT mount on one of the legs.
 

civicjoe

lone wolf mod
Founding Member
Location
Nevada
ive also go my footman loops for my shelf back that there and they are into the metal so they help secure that piece in place as well, you could take it out and replace all the button clips and itd probably be like new, ive considered the rack idea a few times, i love it however the dog Crates are too large to have something like that and when id need it most when i travel and id also need the crates sooo yeah. You could do what i think snowandsurf did and cut out the plastic and put a sheet of metal in there and secure it to the body, i considered that but i didnt want to cut up interior panels
 
Top