Not as good as tube doors but it's a decent update.. Haha
I should have more of an update tomorrow!
You need a shovel back there
#danamigo
You need a shovel back there
#danamigo
I've honestly been thinking about it.. I may do it sooner than later..
I've honestly been thinking about it.. I may do it sooner than later..
And why not an axe while you're at it?
I'll just have all kinds of equipment hanging all over the X haha!
Lol I like where this is going!! I put a shovel and axe on my hatch but before I swapped the struts for the extra height they were to weak to stay up in the cold and I haven't tried since.
I've thought about this as well.. If I did, I would probably go with a custom 4 strut design just to say I did haha :kewl:
Well if you just swap the factory struts it lifts the hatch higher and gives it more strength at the top....but has no resistance when only open about a foot or so. Theres a thread on here somewhere about it.
Winch ordered!
The specs? They are going to be kept secret.. :d
Why not add a little spice to this otherwise boring build haha
Winch ordered!
The specs? They are going to be kept secret.. :d
Why not add a little spice to this otherwise boring build haha
Ironman
Maybe...
Maybe not...
:kewl:
If you did, let me know once you test it out! I have had my eye on that booger for a while now!
With the SAS, it looks like we are going to remove the BL, so I'll either have to modify the RLC or sell it and get a new one made.
You shouldn't have to modify the RLC should you? I know mine will work with or without a BL..
Hmmmm... I'll have to get back with you on that. I just assumed it wouldn't because I thought the mounts were made 1.5-2" lower than normal to account for the body lift. If it will still work, you have no idea how happy i would be!
It's a sucky picture but you get the idea haha
You can see the two different sets of mounting holes.. the bottom for the 2" BLed Xs (which I've utilized) and the two sets above them for the non-BLed Xs. That's the way mine came, at least