Frogstar7055
Wheeling
- Location
- Jacksonville FL
Ball joints.
Nothing sexy.
Nothing sexy.
- Location
- Denver Adjacent
Nice job!USB and AUX imputs to the blank above the cigarette lighter.
USB and AUX imputs to the blank above the cigarette lighter.
I have a few of these for that
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
Figured out that the new horrible sound coming from my engine compartment is coming from the alternator. I guess it is time for an upgrade of some sort.
I just did the same and could not believe how much better my sounds, it was almost deafening before lol
Yorkdiver
Test Drive
- Location
- Ontario, Canada
Just ordered up a Rugged Rocks alternator yesterday. Apparently they are sealed with an idle charge of 130 and a peak of 180. So better than the stock.
Sent from my iPad using Forum Runner
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
Installed AutoZone reman Quest alternator today! Anyone know the bolt size and thread pitch for the ground on the back? It is smaller than the bolt that was in the Xterra alternator.
Jack Stilts
Skid Plates
- Location
- Michigan
I hate to say it, but I think they might all be different. The last three that I went through all had different patterns, and the bolts all came with the alternators. Might be a good idea to go back to the store and mention it.
YouWatchHockey
Bought an X
- Location
- Rogers, AR
Installed a new light bar.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Jack Stilts
Skid Plates
- Location
- Michigan
Replaced tail light bulbs.
/hardcore mods
/hardcore mods
YouWatchHockey
Bought an X
- Location
- Rogers, AR
Added an oil catch can. For anyone who doesn't think they need one just pull your pcv hose off and look inside it. Mine was full of oil and debris. If you can catch that nasty stuff in a can and stop it from going through your engine I think it's worth getting one.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
Last edited:
NMTerras
Suspension Lift
- Location
- New Mexico
Transformed the Chef for the next phase of his life - he has moved to San Antonio to replace NMTerras Jr's totalled car. Meet Chef 3.0 - the daily driver! (kinda)
- removed gobi rack
- removed skid plates
- removed LEDs
- removed most of the HP
- replaced uniballs in TC UCAs to eliminate slop/excessive play
- removed gobi rack
- removed skid plates
- removed LEDs
- removed most of the HP
- replaced uniballs in TC UCAs to eliminate slop/excessive play
Cruecible
Titan Swapped / SAS'd
- Location
- Albuquerque, NM
Wait, what?!?! I was mega confused for a minute. I first read it as you sold Chef 2.0 to the same person as Chef 1.0 (assuming it as San Antonio, NM or something) and your picture was a new ride for you. After reading it slower, I understand now lol.
What's next for you? Modding out the Dodge or is something else in the works?
What's next for you? Modding out the Dodge or is something else in the works?
NMTerras
Suspension Lift
- Location
- New Mexico
Chef will be coming back in a year or two. Ram is already modded as much as it needs to be. I'm done crawling for a while. No time, and other hobbies taking priority (along with work)
Cruecible
Titan Swapped / SAS'd
- Location
- Albuquerque, NM
I can respect that. Hopefully you'll still linger around here
NMTerras
Suspension Lift
- Location
- New Mexico
I'll creep around. Let me know if any of your second gen buddies from TNX want the gobi or skids
Cruecible
Titan Swapped / SAS'd
- Location
- Albuquerque, NM
I wish there was some way I could make any of those work for mine (easily). I think Sanders is looking for a set of skids... I'll ask him tonight or tomorrow
- Location
- Huntsville, AL
I would have liked the skids.
- Location
- Ontario Canada
I would love the gobi but shipping on the damn thing would cost way too much
YouWatchHockey
Bought an X
- Location
- Rogers, AR
Flush mount LEDS attached to the reverse lights and a switch for use anytime.
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
- Location
- All over PA
Cleaned volant filter. It was nasty.
mkgearhead
Test Drive
- Location
- Northeast Colorado
I put an AUX port in one of the empty holes above the stereo.
- Location
- Denver Adjacent
Hell yes Android radio!
mkgearhead
Test Drive
- Location
- Northeast Colorado
Yup! It has wifi so I can use my phone as a hotspot and stream right through the stereo if I want to.
- Location
- Denver Adjacent
I've got one also. It's a fantastic bit of kit.
- Location
- Huntsville, AL
Sprung a leak in my rear diff. Waiting for the fresh Permatex to cure a little bit (got 15 more minutes) before I torque'm down.
NMTerras
Suspension Lift
- Location
- New Mexico
Yeah, not shipping this stuff. too heavy. They can sit in my garage until I sell em or get the itch to modify the rack to work with a pickup truck
YouWatchHockey
Bought an X
- Location
- Rogers, AR
Added and Bully Dog GT and New Tires! 33's!
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
R00
Bought an X
- Location
- SF Bay Area
What's holding that Bullydog?
YouWatchHockey
Bought an X
- Location
- Rogers, AR
Shizane2002
First Fill-Up (of many)
- Location
- Alexandria, Virginia
Mud spa treatment.
YouWatchHockey
Bought an X
- Location
- Rogers, AR
Someone got a new Magnaflow muffler! It will be installed tomorrow!
Sent from my SAMSUNG-SM-G870A using Tapatalk
Sent from my SAMSUNG-SM-G870A using Tapatalk
Xaggerated
Tricycle
- Location
- Greer, SC
Sent from my XT1045 using Tapatalk
02Xterra
Wheeling
- Location
- Central VA
Unboxed a few parts
Sent from my VS986 using Tapatalk
Sent from my VS986 using Tapatalk
- Location
- Denver Adjacent
Those are pretty. Shame they won't stay that pretty.
mkgearhead
Test Drive
- Location
- Northeast Colorado
I just did the resistor bypass mod on my knock sensor. 8 PSI feels a whole lot better than 3. :sure:
Xaggerated
Tricycle
- Location
- Greer, SC
Finally did the hatch mod. That little bit of extra room is so nice.
Sent from my XT1045 using Tapatalk
Sent from my XT1045 using Tapatalk
- Location
- Western Massachusetts
Replaced this.
Because reasons.
Because reasons.