- Location
- Allen, Texas
- Location
- All over PA
Ordered radflo's for the rear. I'm not a fan of the bilsteins.
- Location
- Western Massachusetts
Installed a new stereo and universal phone/tablet mount. More info and a link or 2 later maybe...I'm feeling lazy.
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
Replaced the heat/air control box and heater core. Now turn signals are not working.
Left the plug on the center console hazard light switch unplugged.
Sent from my SM-N920P using Tapatalk
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
Hazards are plugged in and work
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Well then. Idk. I just remember that stopping mine from working.
Sent from my SM-N920P using Tapatalk
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
- Location
- Denver Adjacent
Probably a good idea. That's the only thing in the center stack that has anything to do with the signals.
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
I had the whole dash out to replace the entire heat/air control box.
Sent from my iPhone using Tapatalk
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
I also have a new flashing airbag light.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
Airbag light is fixed. Just needed reset. Still no turn signal.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Location
- Western Massachusetts
I really don't get why the turn signals don't work but the hazard lights do...are you testing the turn signals with the key in the ON position/truck running? Hazards work any time but turn signals only work when the truck is on. That's my only guess.
- Location
- Denver Adjacent
Also, I've heard that the stalk likes to go bad as well. May merely be coincidental.
- Location
- South Park, CO
Bought stuff
Sent from my iPad using Tapatalk
Sent from my iPad using Tapatalk
ellisfamilyokc
First Fill-Up (of many)
- Location
- OKC
All fixed. Replaced the flasher. Turned the signals on and nothing. Was then really mad. Checked the fuze again. Now it was blown. So, so, weird. I really did check that first. Put the new one in and all is well. My current theory is that the ep34 flasher died and somehow eventually blew the fuze. Who really knows. But, at least it all works now.
Sent from my iPhone using Tapatalk
- Location
- Denver Adjacent
Why'd you do the JWT? Just curious. I've always heard that OE should always be used on Nissans.Finally, 35's.
Now my clutch went out so a JWT clutch and low inertia flywheel are going in. Glad it happened now and not in Moab!
- Location
- Denver Adjacent
Good to know. Thanks! Also, check your PMs.
rolling rock
First Fill-Up (of many)
- Location
- PA
Replaced the cabin filters.
Cleaned the Airaid dry flow air filter.
Gave it a bath.
Cleaned the Airaid dry flow air filter.
Gave it a bath.
rolling rock
First Fill-Up (of many)
- Location
- PA
Finally, 35's.
Now my clutch went out so a JWT clutch and low inertia flywheel are going in. Glad it happened now and not in Moab!
That is one fine looking x! Love it.
- Location
- Allen, Texas
Nice! Makes me wonder if I shouldn't have considered a 2nd gen.
- Location
- Western Massachusetts
Oil change and tire rotation today turned into me pulling the front driveshaft and an oxygen sensor to tighten the header to catalytic converter bolts AGAIN. WTF!?
At least it's done I guess.
At least it's done I guess.
- Location
- Central FL
Did a little painting yesterday...
Sent from my SM-G925P using Tapatalk
- Location
- Denver Adjacent
Niiiice. Looks awesome.
- Location
- Central FL
- Location
- Western Massachusetts
Those look really good!
Today I ordered the last bits I need for my super secret mod.
Today I ordered the last bits I need for my super secret mod.
- Location
- Central FL
- Location
- Denver Adjacent
You did a really nice job with the center caps.
- Location
- Allen, Texas
Damn looks really really good.
- Location
- Central FL
Thank you sir! The nissan emblem comes off so that made it alot easier.
Sent from my SM-G925P using Tapatalk
- Location
- Central FL
Thanks! Just gotta paint the front bumper and grill. That's next weekend...lol
Sent from my SM-G925P using Tapatalk
- Location
- All over PA
Touched up front bumper then wash and wax after snorkel install yesterday.
- Location
- Denver Adjacent
Damn that snorkel looks good. Imma start on mine soon.
- Location
- All over PA
Thank you sir. Fair warning you'll want a hand. It's much easier to pull the fender.
- Location
- Denver Adjacent
Why did you have to pull the fender? Just made he connections easier.
- Location
- All over PA
Connections easier and marking up/drilling pillar bracket easier.