Triple A's Project "AR-X"

11Pro4x

Triple A<br><img src="http://i164.photobucket.com/
Location
Phoenix, AZ
IMG_4243.jpg

Username: 11Pro4X
Year: 2011
Make: Nissan
Model: Xterra
Trim: Pro4X
Color: Silver Lightning (K12) :eek:


Feb 2012 thenewx.org TOTM Winner
Feb12TOTMEntry.jpg



As she sits today!
Both Pics courtesy of GlamisDunesStar in Moab!
marcin4.jpg

From the rear!
Marcin1.jpg



Exterior:
  • Mud Flaps Removed
  • Melt Mod complete
  • McMaster-Carr lift gate struts
  • Gobi Ladder
  • SilverBullet Edition
  • 2 Rigid Dually LED Back Up/Flood Lights (Transferring to rock lights)
  • Xoskel Glare Shields for the Hellas
  • Gobi Ranger Rack (installed 08/24/11, from goneMoabX)
  • Deflecta-Shield Aluminum Storage Box (installed 08/31/11)
  • 2 Quick Fists for a shovel mount (installed 10/15/11)
  • Nissan Keypad Keyless-entry System (installed 10/27/11)
  • Hood Stealth Mod (01/07/11)
  • 20 inch Rigid LED Light bar (02/08/12) with Custom Bumper
  • 40 inch Rigid LED Light bar (installed 05/11/12)
  • 2 6 inch Rigid LED Light Bars...back up lights
Armor:
  • Xoskel Sliders
  • Shrockworks Rear Diff Cover (installed 05/15/11)
  • Shrockworks Front Radiator Skid (installed on 08/31/11)
  • Original NX Rocks Engine, Gas-tank, Transmission, and Transfer Case Skids (installed 07/01/11)
  • Shrockworks Rear Bumper w/ Tire Carrier
  • Hunter Off Road Custom Bumper (installed 02/07/12)
Suspension/Tires:
  • Firestone Destination A/Ts installed 285/75/16 E loads
  • Firestone Destination M/Ts for those trips to the mall! (mounted on a second set of rims)
  • Radflo External Res for the rear (installed 03/26/11)
  • Removed front and rear sway bars (05/25/11)
  • PRG Adjustable Shackles (installed 07/09/11)
  • PRG Titan UCAs (installed 01/28/12)
  • Sway-Away Coil-overs with 650lb Eibach springs (installed 01/28/12)
  • Alcan Rear leaf pack extra 400lbs of weight plus 3.5 inches of lift (installed 01/28/12)
Interior:
  • 3-D Cell Mag Light Installed
  • Garmin GPS Installed
  • Cobra 29LX CB Installed
  • 3 foot Firestix CB antenna on Xoskel Antenna mount
  • Weathertech Front Floor Liners
  • XT Fabrications Rear "Shelf"
Under the Hood:
  • Full Amsoil Fluids all the way around!
  • Air Flow Snorkel (installed 09/24/11)
  • M205 swapped (installed 01/27/12)
  • DT Catback Exhaust (installed 01/29/12)
  • Volant CAI (installed 02/23/12)
  • Transmission By-Pass (03/02/12)
  • Aux Transmission Cooler (03/02/12)
  • Femco Oil Drain
Gear:
  • 60 inch Hi-Lift extreme
  • Hi-Lift recovery gear
  • Gear box mounted to the Gobi Rack
  • Shovel mounted to the Gobi Rack
  • Axe mounted to the Gobi Rack
  • Smittybilt XRC 10 Comp series winch w/ synthetic line
  • 20" Gerber Machete
  • Handgun Holster in Door
  • 2 4 Gallon Rotopax on the Roof
  • ViAir Constant Duty On Board Air System
Mods to come/





Coming up Hells Gate on Hells Revenge goneMoabX. Thanks to Kevin for spotting me up and Jarrod on the right for spotting me down the entrance!
DSC_0336.jpg



TOTM Winner April 2011 (Photo courtesy of RJCX)
_MG_9865.jpg



Another Shot 2nd time up that hill (Photo courtesy of RJCX)
11Pro4x2.jpg


Stock Truck!
DSC_0059.jpg



DSC_0069.jpg



Sliders
CIMG1167.jpg



CIMG1168.jpg



Fog Light Mod
CIMG1161.jpg



CIMG1165.jpg



DSC_0270.jpg



How she has changed
photo3.jpg

photo-1.jpg

DSC_0046.jpg

photo.jpg

Hellas.jpg

DSC_0196.jpg

[imghttp://i1190.photobucket.com/albums/z451/2011Pro4X/CANVAZ PreRun 100811/305.jpg[/img]
301.jpg

Hood.jpg

bumper6.jpg

bumper9.jpg

Feb12TOTMEntry.jpg

IMG_4243.jpg

DSCF7323.jpg

DSC_3095.jpg

Fins23.jpg

Pic courtesy of RJCX
IMG_0092E.jpg
 
Last edited:

granitex

Skid Plates
Founding Member
Location
Columbus OH
Welcom,

AAA,

Omar is sitting back at Mcdonalds just waiting for you.

just remember press the picture of the food that you want
 

11Pro4x

Triple A<br><img src="http://i164.photobucket.com/
Location
Phoenix, AZ
Welcom,

AAA,

Omar is sitting back at Mcdonalds just waiting for you.

just remember press the picture of the food that you want

HAHAHA I laughed my ass off reading that!!

Thanks for the welcome guys and the bumper is a custom bumper from Hunter Off Road in Phoenix.
 

Jmac289gt

Sliders
Founding Member
Location
Dickinson, TX
Very nice looking rig sir, and as I have stated here before...im a big fan of tube bumpers and yours looks sick man. Love the way it curves with the lines of the X for the most part.
 

11Pro4x

Triple A<br><img src="http://i164.photobucket.com/
Location
Phoenix, AZ
Very nice looking rig sir, and as I have stated here before...im a big fan of tube bumpers and yours looks sick man. Love the way it curves with the lines of the X for the most part.

What I told Hunter at Hunter Off Road was "approach angle" and get a winch tucked up as far as you can up in there! Its funny I hated tube bumpers at first, then Moab happened and I saw a few cool designs from other people...and this is what we have!
 

gorillamel

Lockers Installed
Founding Member
Location
Idaho!
Custom work FTW! I esp like that last pic showing off all your skids. Looking good. And of course, I have a soft spot for fellow bedlined hoods out there. :)
 

RATTFINK

XN OG Admin.
Founding Member
Location
Conroe, TX
Sounds like it was fun! I would really like to board again. I have no idea how to ski; but snowboarding is cake for me.
 

11Pro4x

Triple A<br><img src="http://i164.photobucket.com/
Location
Phoenix, AZ
Here are pics! Aluminum for the win!
 

Attachments

  • image-3584305563.jpg
    image-3584305563.jpg
    94.4 KB · Views: 37
  • image-2344797530.jpg
    image-2344797530.jpg
    95 KB · Views: 43
  • image-991909007.jpg
    image-991909007.jpg
    87 KB · Views: 36

11Pro4x

Triple A<br><img src="http://i164.photobucket.com/
Location
Phoenix, AZ
Oz_X said:
FYI Marcin, a lot of r180s have blown due to being in 4wd @ full lock. Its kind of considered a 'no-no' with these aluminum cased diffs. In case you didn't know. Here's to a speedy recovery for "AR-X" :)

Yeah I've heard it with an r180 but never a m205. Guess its the same issue.
 
Top