The Greater Post Whore Society - Volume 2: Welcome Home

Status
Not open for further replies.

bigjim247365

Anime boobs & male genitals? Sign me up!
Supporting Member
Location
Hainesville IL
Or your mom. In short shorts. And a bikini top. Take pictures.
bo2hn5W.jpg
 

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
=/ I finished wiring up my roof boobs. But they don't work. And somehow I blew the fuse going to the switch. I don't understand. I tested the lights, they're correct. Before I soldered the connector on the lights, I plugged it in and metered the connection on the roof. Got 12v on one leg, then the other, just as expected. Put the two together, and nada. I am not happy right now. The car seats in the back prevent me from ripping into the fuse box and finding the problem. On low beam, the draw should only be about 1A, on high beam its about 3A. Neither of which should have blown the 15A fuse that I'm running on. I don't understand. At all.
 

bigjim247365

Anime boobs & male genitals? Sign me up!
Supporting Member
Location
Hainesville IL
=/ I finished wiring up my roof boobs. But they don't work. And somehow I blew the fuse going to the switch. I don't understand. I tested the lights, they're correct. Before I soldered the connector on the lights, I plugged it in and metered the connection on the roof. Got 12v on one leg, then the other, just as expected. Put the two together, and nada. I am not happy right now. The car seats in the back prevent me from ripping into the fuse box and finding the problem. On low beam, the draw should only be about 1A, on high beam its about 3A. Neither of which should have blown the 15A fuse that I'm running on. I don't understand. At all.
I imagine you have roof bewbs in a parallel circuit correct? would a short to ground or power cause the fuse to pop?
 

bigjim247365

Anime boobs & male genitals? Sign me up!
Supporting Member
Location
Hainesville IL
every time i have a dream where i am in a house the floor plan makes no sense. it was a pretty good house party but it was hard to walk around the place.

dreams are strange.
 
Last edited:

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
I imagine you have roof bewbs in a parallel circuit correct? would a short to ground or power cause the fuse to pop?
It absolutely would. But I tested the wiring on the boobs. And there is no short. And when I hook the boobs to the bench test power supply, they work great. That's what doesn't make sense. I tested the wiring, 12v at the connector on two different legs (high and low beam), worked exactly as it should. I'm now wondering if the diodes that I installed to Y the upper LED of the switch is causing problems. The diodes were rated for 10A. But the only thing they should be worrying about is the small LED in the switch. Not the actual load. This is why I'm confused.
 
Status
Not open for further replies.
Top