- Location
- Covington, Va
Valmet DCS it appears....my job is rough...
Valmet DCS it appears....my job is rough...
…..homer??my job is rough...
hey isn’t that homer’s chair…….waaiit just a minute there buddymy job is rough...n
I wish I'd have gotten Nisstec but I didn't compare to 4x4parts..still going over lift kits and its doing me a bamboozle
4x4 parts or nisstec
the 4x4 parts lift says its a 3 inch lift, and you have the option of shackles or add a leaf, but if the shackles say they only provide 1.5" lift (unless the ones in the kit are different than the pml shackles)
nisstec is more expensive, no uca, but alcan springs and well, I'm guessing xterra leafs kinda suck since mine was broken when I got the truck and on the fb groups everyone has at least one broken leaf
I was not expecting my bitch pigeons to win, or play as well as they did.Oof. 0-4 in the red zone for Denver tonight.
hmm. their adjustable ones go up to two inches in the rear I think.still going over lift kits and its doing me a bamboozle
4x4 parts or nisstec
the 4x4 parts lift says its a 3 inch lift, and you have the option of shackles or add a leaf, but if the shackles say they only provide 1.5" lift (unless the ones in the kit are different than the pml shackles)
nisstec is more expensive, no uca, but alcan springs and well, I'm guessing xterra leafs kinda suck since mine was broken when I got the truck and on the fb groups everyone has at least one broken leaf
I've been running 4x4 Parts Adjustable shackles for about 2 years now on my 03. I'm adding an AAL here shortly, just to help compensate for the weight of the trailer when I start towing it. I've got no complaints with that setup, but we'll see how the AAL does in conjunction with the adjustable shackles.still going over lift kits and its doing me a bamboozle
4x4 parts or nisstec
the 4x4 parts lift says its a 3 inch lift, and you have the option of shackles or add a leaf, but if the shackles say they only provide 1.5" lift (unless the ones in the kit are different than the pml shackles)
nisstec is more expensive, no uca, but alcan springs and well, I'm guessing xterra leafs kinda suck since mine was broken when I got the truck and on the fb groups everyone has at least one broken leaf
You need uppers to get to 3" of lift on a 1st gen. The stock uppers won't make the geometry.still going over lift kits and its doing me a bamboozle
4x4 parts or nisstec
the 4x4 parts lift says its a 3 inch lift, and you have the option of shackles or add a leaf, but if the shackles say they only provide 1.5" lift (unless the ones in the kit are different than the pml shackles)
nisstec is more expensive, no uca, but alcan springs and well, I'm guessing xterra leafs kinda suck since mine was broken when I got the truck and on the fb groups everyone has at least one broken leaf
are you a petroleum operator?my job is rough...
Three stages of girlfriend sex-
you know my stance on thisBut taking an on clock work doo doo is the best
yea, well kinda. I work at a large ethanol plant in nw Iowa. So my job is to take samples of our process, from start to finish. The toughest part of my job is picking what movie i want to watch next. Its not a hard job. And it pays wellare you a petroleum operator?
I'd say there's three or four more in between your list. Some between 1 and 2, some between 3 and 4.Three stages of girlfriend sex-
Stage one- madly in love and you have sex in every room, kitcen table, pool table shower, etc
Stage 2- you just have sex in the bedroom
Stage 3- you pass your girlfriend in the hall way, "Hi honey" and she replies, "ufck YOU"
These are the best jobs.Its not a hard job. And it pays well
Welcome @XangrythAlso, welcome newcomer to the whore thread!
well shiiiiiiiiiit, im a night time fuel hauler in WI.yea, well kinda. I work at a large ethanol plant in nw Iowa. So my job is to take samples of our process, from start to finish. The toughest part of my job is picking what movie i want to watch next. Its not a hard job. And it pays well
pooping on company is good but, i make a dime, boss makes a buck. so i crank my hog in the company truck.But taking an on clock work doo doo is the best
Wish it was meSomeone is running a ufcking mower right now.
Find Mary, apply knife.Taking a week off. Camping, fishing, and acting a fool starting tomorrow. Anyone have a good bloody mary recipe they enjoy?
Just got off work, read your reply too fast... ended up googling mary apply knife, came back and got the rest of the story...to quote paul harvey...good day!Find Mary, apply knife.
this isnt nam...there are rules hereSomeone is running a ufcking mower right now.
My screen says 4:47 AM, what time was it when you posted? Im thinking 6 ufcking 47 which means Id have to kill someoneSomeone is running a ufcking mower right now.
Bingo.My screen says 4:47 AM, what time was it when you posted? Im thinking 6 ufcking 47 which means Id have to kill someone