- Location
- Hainesville IL
am up early.
me an-gy
me an-gy
TGPWS 8: Hope it can only get better.
- Thread starter Prime
- Start date
- Status
- Location
- Hainesville IL
- Location
- Covington, Va
Go back to sleep...
- Location
- Hainesville IL
tuck me in, bro
- Location
- Covington, Va
Why is things difficult? So I'm putting in this switch, got everything on the entrainment center with an ethernet port wired, so far so good...
Everything connects fine, EXCEPT THE F'N XBOX 360. It's claiming it can't connect to Live, and it's asking for port forwarding from the router, whatever port forwarding is. And it's a router Lumos installed so I have no idea about getting into the settings.....
GAH!
/rant
Everything connects fine, EXCEPT THE F'N XBOX 360. It's claiming it can't connect to Live, and it's asking for port forwarding from the router, whatever port forwarding is. And it's a router Lumos installed so I have no idea about getting into the settings.....
GAH!
/rant
- Location
- Allen, Texas
The 360 still connects to XBL?
Go check your NAT settings on your 360. See what that says.
Go check your NAT settings on your 360. See what that says.
- Location
- Covington, Va
NAT?
- Location
- Covington, Va
It connected over wifi. But I haven't had it on for a while.
- Location
- Allen, Texas
Yup. I havent used my 360 in a bit but go find system settings, or network settings, etc
just curious if its set to strict. may not change your situation but thats where id start.
- Location
- Denton, TX
- Location
- Denton, TX
- Location
- Denton, TX
- Location
- Denton, TX
- Location
- Denton, TX
@Fromfrontier2Xterra knows this dude for sure. Age is a bitch
- Location
- All over PA
I know it's a MAD rendering. Can't figure out of who though.
- Location
- All over PA
Nevermind, I'm dumb. It's just the Mad Comics kid being old. Lol
- Location
- Allen, Texas
That is Alfred E. Neuman, and you put some respect on him.
He entertained me all through my childhood.
Plucky
Test Drive
- Location
- Hobbs, New Mexico
- Location
- Covington, Va
So much truth...
- Location
- Denver Adjacent
Does the switch have a dedicated and marked uplink port? Possibly one that is marked to the port next to it?
- Location
- Hainesville IL
- Location
- Covington, Va
- Location
- Denver Adjacent
Just checking. I see one cable without a link light. That's probably your Xbox. Bad cable or settings in the Xbox. It might turn off the ethernet port if it's connected to wifi.
- Location
- Burtonsville, Md
Well I decided to eat my dinner [ Steak/tater/green bean's and sautéed onion-shroom ] while reading thru the new post's on XN. I knocked my MILK over and not a single drop went any where near the keyboard
On the downside next to the computer table is a 3 tier shoe rack So some leather boot's /shoe's got a 2% milk bath inside and out
I'm sure ufcking glad I keep my shoe's on the shoe rack by the front door
On the downside next to the computer table is a 3 tier shoe rack
So some leather boot's /shoe's got a 2% milk bath inside and outI'm sure ufcking glad I keep my shoe's on the shoe rack by the front door
- Location
- Covington, Va
The XBox is turned off. It lights up when you turn it back on. Blu-ray player does the same.
- Location
- Denver Adjacent
Just trying to diagnose
meisanerd
Need Bigger Tires
- Location
- Edmonton, AB, Canada
If the Xbox was connecting via wifi, there shouldn't be anything wrong with it wired in... unless the router is separating the wireless and wired connections, and the settings are different...
- Location
- Covington, Va
Totally emotionless replies from me when troubleshooting man. Just stating facts.
- Location
- Covington, Va
The router feeds some air-ties routers for mesh wi-fi around the house. No issues on the Mesh but I've had port forwarding things for a desktop but it wanted forwarding on the wi-fi and didn't ask for that on a LAN connection straight to the router.
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
How much you asking, and what does it need?
BEEFY
I Smile when Gasoline Can Freeze
- Location
- Prince George, BC, Canada
Had a fire and many drinks at a friends place last night. I really like the heater in the ambo. -35 with the wind chill outside and a nice 18 inside. It was cold so the fire was big.
Derailed_75
Mud Clawson
- Location
- Danville Va
I read that with a quick glance and though it said MILF.Well I decided to eat my dinner [ Steak/tater/green bean's and sautéed onion-shroom ] while reading thru the new post's on XN. I knocked my MILK over and not a single drop went any where near the keyboard
On the downside next to the computer table is a 3 tier shoe rack
I'm sure ufcking glad I keep my shoe's on the shoe rack by the front door
Was wondering how you spilled her!!!
meisanerd
Need Bigger Tires
- Location
- Edmonton, AB, Canada
I havent decided on a price, that partly depends on if I can get it running well soon, or if someone just throws me some money and takes it away...
At the moment, it is throwing a P0305 and shuddering like crazy trying to accelerate. I attempted to pull the cylinder 5 coil pack and spark to see if there was something obvious, or swap it to a different cylinder to see if the code follows it, but don't have that much room in my garage, and was too lazy/busy to pull the air intake on Sat, as I was also swapping a bunch of stuff to the new X.
Also has an issue with the driver rear speed sensor that Ive been chasing for a month, should have the part to (hopefully) fix that, but the p0305 showed up before I got the chance to drive to my buddies place to do that.
Has 300k km on it, so some age issues are starting to pop up.
- Location
- All over PA
Opened up that mad elf beer cheese I posted the other day. It's pretty damn tasty.
- Location
- Denver Adjacent
Mmmmm.....beer cheese
- Location
- Denver Adjacent
Did you fix it yet or get too drunk and start smashing things?
- Location
- Covington, Va
Haven't touched it. Everything else is hunky dory so just letting it ride for the time being. Not like the 360 gets a bunch of use anymore.
How do you guys trim the excess off the pass through style RJ45 connectors?
Derailed_75
Mud Clawson
- Location
- Danville Va
Never used the pass through. I think there's a special crimper that cuts those you need to use.
Just go old school it takes some practice but you can make ends that look damn near machine made if you do it enough
- Location
- Denver Adjacent
By not using pass through connectors.
- Location
- Denver Adjacent
This is the way.
- Status