- Location
- Denver Adjacent
I'd be curious to see see that when you're done.I will be bolting mine to the bumper with enough gap to take a hit and then I will tie it in to the frame as well
I'd be curious to see see that when you're done.I will be bolting mine to the bumper with enough gap to take a hit and then I will tie it in to the frame as well
Here's the jenga-jam.
Ordering gears this week. Plan is to get the axles built out of the truck. Complete the Titan rear soup to nuts. Get the 205 geared and buy v8 Pathy half shafts.
Swap the Titan rear and 205 in. Leave the front suspension untouched for right now. Sell the matching 3.69 axles.
Once those are gone, use that cash to buy Titan uppers, and the rest of the brake parts for the front.
Then I just need leaves for the rear and shocks. That gives me the ability to sell the Radflo's I have now.
Need to have the geared axles in by winter this year. Then do the suspension and front brakes in the spring.
Yeah, I plan to have a mod day once the axles are ready to go in. My neighbor will probably come help, but the more we can get the faster it'll go.I'm going to be a bit behind you in schedule - looking to buy front/rear 4.56 gears this fall, install in M205 off-truck this fall, buy UCA/Shocks/Half Shafts/LCA/everything else in spring, regear M226 on truck in late spring (while removing r180 half shafts and running 2wd for a bit), swap front diff and install front susp shortly thereafter. Then sometime later in 2020 2"body lift for 35's.
Would love to swing by when you do install the front/rear diffs this fall/winter,
Sell the matching 3.69 axles.
All masked up. Ready for rust prevention.
View attachment 10677
I like to to make sure.All that for just spraying the cutouts on the bumper? Overspray's a bitch but..
Just need it under the hood. And then I have to get my switched output for the white LEDs through the firewall.There are a bunch in the fuse box next to the glove box too if you need it inside the cab.
Yeah. I'm going to order two sets next week when I get paid.Cool look with the alternating signal light. You still having some lights shipped to my house ?
Doing the drivers side DRL / LED harness tonight.
View attachment 10823
I believe in pretty wiring. It makes the whole world nicer.That's crazy. I always sponge bathe my wires after sharpening them on a brick or stone..
But really.. Very nice setup you got going~
L
You clean it.I like your garage. Clean it.
No sale.it will cost you one Fox Body
Huh..ask and you shall receive.. disregard my other inquiry/statement.Went to the junk yard today. Looking for some core parts for the Titan brakes. Kind of won.
Pulled these calipers off of an 05 Armada (bolted one up to my 2012 QX56 knuckles).
View attachment 16415
I was going to use these for cores on new calipers.
But then I looked inside.
View attachment 16416
These are new calipers! Those pots have almost zero miles on them.
And the rubber on the pins is perfect.
View attachment 16417
So I'm just going to clean them up and paint them. $15 junk yard calipers for the win!
Also ordered the hard lines for the Titan rear today. I'm tired of letting things sit. Time to swap this bitch.