NewModelGuy's TITANic X

Pro-2X

Pro-2X

Suspension Lift
Location
Rockmart, GA
Pro-2X's TITANic X

So I have been meaning to get around to this for a while. Here goes...

I have a 2011 Xterra S model that I bought new in may 2012.

Dealership_zps56e7baca.jpg

When I bought t I had no intention of doing anything, but getting to/from work so I sold my factory foglights to a buddy whose didn't come with them..like to have that one back.

My first mod was my new wheels and then a week later the PRG shackles and 3" spacers...Coil bucket contact does suck...
temporary_zpsc2d645da.jpg

After the lift and wheels, I let it sit saggy in the back for a while.

SO I bought some KCs and an Xoskel lightbar
temporary_zpsc09f313a.jpg

Installed a Magnaflow 2in 1out n lieu of the restrictive factory y pipe.

Added a Cobra CB
temporary_zps17c3e24a.jpg


Added factory tow hook and made my own skid plate
temporary_zpsd0cce866.jpg


NEW TIRES!!!!
temporary_zps48704266.jpg


A little flexing
temporary_zpsf20775a5.jpg

temporary_zps704ebebf.jpg


New rear bilsteins to make room for rear lift
temporary_zps6da5f024.jpg


New Rear Add a leaf
temporary_zps3bf2e922.jpg


COWBELL!
Smilie_bell_anim_zps3006bec0.gif


07/23/2013
ypeze5u4.jpg


A few mods yet to come
temporary_zps6de8b629.jpg

Titan Swap

4ft Firestik
temporary_zpsd81270ed.jpg


Front 5100s
temporary_zps81f8299d.jpg



Chunky Rocks, flexing, and hills + no front axle = Almost stuck...= Awesome pic? Check my math on that one.
temporary_zps4da248c0.jpg



SOA
4WD Conversion (Cancelled...Think I like being a Pro-2X)
Powertrax Locker
Snorkel
Volant CAI
Diff Breather mod

That is it...for now. I would say any comments are welcome, but I think we all know that isn't true. However I do reallyappreciate any positive feedback.
 
Last edited:
Muadeeb

Muadeeb

Nissan al Gaib
Admin
Location
Dallas
Awesome rig you have there. I love the stance of a Titan Swapped rig. Oh, and nice mall crawler ;)
 
Last edited:
Pro-2X

Pro-2X

Suspension Lift
Location
Rockmart, GA
Yes, it re uses the factory top plate so the spacers will still work. So I have 3" spacers, 2" of adjustment in the shocks, and stiffer springs. No way i can use ALL of it. That would provide 6.5" of lift. Very much in excess over what the arms can handle.
 
BigTim55

BigTim55

Banned
Location
San Antonio
NewModelGuy said:
Yes, it re uses the factory top plate so the spacers will still work. So I have 3" spacers, 2" of adjustment in the shocks, and stiffer springs. No way i can use ALL of it. That would provide 6.5" of lift. Very much in excess over what the arms can handle.
Click to expand...

Very nice. You got your titan arms already?

Sent from Xavier School for Gifted Youngsters
 
akinc

akinc

Skid Plates
Location
Dayton, Tennessee
I have a small lift, I have 2" PRG Shackles in the back, they are just at stock height right now. I have a set of coilovers frm an Off Road model X, and some 2" spacers for those. Just can't get the UCA to come apart from the ?spindle? (can't think of what that part is called right now) so that's why that isn't installed yet.... I've tried beating it with a hammer like the how to says but..........
 
DirtyRice120

DirtyRice120

Need Bigger Tires
Founding Member
Location
Knoxville, Tn
NewModelGuy said:
Yes, it re uses the factory top plate so the spacers will still work. So I have 3" spacers, 2" of adjustment in the shocks, and stiffer springs. No way i can use ALL of it. That would provide 6.5" of lift. Very much in excess over what the arms can handle.
Click to expand...

Any idea where I can find that top plate? Other than nissan. Mine is screwed so it squeaks like crazy.

K. Rice
 
Xterraforce

Xterraforce

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Signal Mtn., TN
I'm really looking forward to seeing it in person with the new tires. It looks so much better with some tread on the shoes.
 
You must log in or register to reply here.
Top