- Location
- All over PA
Hey guys, first post first X with big dreams for this thing. Already started with the DIY stuff
Now if anyone could teach me how to change my damn name that would be great.
Sent from my iPhone using Tapatalk
Welcome!
Hey guys, first post first X with big dreams for this thing. Already started with the DIY stuff
Now if anyone could teach me how to change my damn name that would be great.
Sent from my iPhone using Tapatalk
Welcome in! Stay a while and listen!
You can do check engine eliminators. They fool the computer into thinking that the emissions are correct. As far as emissions, if you replace your secondary cats with new ones at the same time, you should be able to pass a sniffer with no issue. Fed law requires that you simply have catalytic converters. If you do more efficient hi-flows they'll usually out perform the OE ones as far as the testing is concerned.Thanks Prime. Are there any emissions issues with the headers? Don't I need the cats for the O2 sensors?
Welcome from SCThanks for having me. From South Carolina
Cool story
Welcome to XN!Ok, NuB here. First post. Just looking around for now. Just picked up a 2001 for a song & a dance. Had it towed (engine won't rev over 1800 and previous owner says trans is bad). I'll get my guys to diag it & see what goes. I'll update as I go along. My plans are making it into a "Doomsday Ark"...LOL. Seriously, It's a project that I'm starting and my 8yo can get his hands dirty with me. Pics to come. Thinking about doing the whole body with Line-X paint...any thoughts on that?
Welcome. Can't wait to see the project come togetgerOk, NuB here. First post. Just looking around for now. Just picked up a 2001 for a song & a dance. Had it towed (engine won't rev over 1800 and previous owner says trans is bad). I'll get my guys to diag it & see what goes. I'll update as I go along. My plans are making it into a "Doomsday Ark"...LOL. Seriously, It's a project that I'm starting and my 8yo can get his hands dirty with me. Pics to come. Thinking about doing the whole body with Line-X paint...any thoughts on that?
Welcome to XN! We have a few regulars in TX. Sounds like a fun truck project. Do you know if the timing belt has been done yet?
At least I'm in the metroplex proper, with a legit Dallas work address. You're in the hinterlands up north. Closer to Oklahoma than Dallas.What he said. But more enthusiastically.
Welcome welcome. Feel free to swing by the great post whore society and shoot the stuff.Joining the nation from Southern California
Soooo . . . how do I become a supporting member?Welcome from Denver!
Member drive will be happening soon and there are dues. Keep an eye out for a post. @Prime i'm sure will be posting in the upcoming weeks.Soooo . . . how do I become a supporting member?
Thanks. Will do.Member drive will be happening soon and there are dues. Keep an eye out for a post. @Prime i'm sure will be posting in the upcoming weeks.
Hi From Ontario Canada
I just got my first X its a 2004. I got it with a cracked transmission housing(manual), and the one I had a line on at the autowreckers turned out to be broken in the same place. Hopefully I can find one.
Once I get the Trans in I have some big plans
gonna change out the rims and tires, I'm thinking around 32" Any suggestions on rim back spacing?
I haven't decided on Body or Suspension lift get but I'm still fighting with trying to get the torsion bars out so I can drop the trans (what a pain) any tips there?
Then I figure I'll make some custom bumpers and of course add some lights
Any other good Mod you can suggest? or Ideas on where I can find a new manual Trans?
Hey welcome from the Ottawa valley. Where around Ontario you fro. ?Hi From Ontario Canada
I just got my first X its a 2004. I got it with a cracked transmission housing(manual), and the one I had a line on at the autowreckers turned out to be broken in the same place. Hopefully I can find one.
Once I get the Trans in I have some big plans
gonna change out the rims and tires, I'm thinking around 32" Any suggestions on rim back spacing?
I haven't decided on Body or Suspension lift get but I'm still fighting with trying to get the torsion bars out so I can drop the trans (what a pain) any tips there?
Then I figure I'll make some custom bumpers and of course add some lights
Any other good Mod you can suggest? or Ideas on where I can find a new manual Trans?