The Greater Post Whore Society - Volume 6: Wash Your Hands On The Way Out

Status
Not open for further replies.
TheCrabby1

TheCrabby1

I Smell Fishy
Supporting Member
Location
Burtonsville, Md
Crawled under Odo yesterday and checked all bolt's on rear end and everything still good and tight. What would be recommended to put on the frame over the rust ? Also I'm guessing the high lift jack's only work with metal bumper's ??? I'm just starting to round stuff up to be slightly better then novice trail ready so any suggestion's will be considered . Bigger cooler's / an ice maker / and liquor selection's have already been scrutinized :D:D:D:confused:
 
harryron

harryron

The Grumpiest of Mid-Westerners
Location
ohio
TheCrabby1 said:
Crawled under Odo yesterday and checked all bolt's on rear end and everything still good and tight. What would be recommended to put on the frame over the rust ? Also I'm guessing the high lift jack's only work with metal bumper's ??? I'm just starting to round stuff up to be slightly better then novice trail ready so any suggestion's will be considered . Bigger cooler's / an ice maker / and liquor selection's have already been scrutinized :D:D:D:confused:
Click to expand...
High lift will work with metal bumpers and sliders, As far as under body treatment you will have to probably do some homework.
 
TerryD

TerryD

Total Tease
Supporting Member
Location
Covington, Va
TheCrabby1 said:
Crawled under Odo yesterday and checked all bolt's on rear end and everything still good and tight. What would be recommended to put on the frame over the rust ? Also I'm guessing the high lift jack's only work with metal bumper's ??? I'm just starting to round stuff up to be slightly better then novice trail ready so any suggestion's will be considered . Bigger cooler's / an ice maker / and liquor selection's have already been scrutinized :D:D:D:confused:
Click to expand...
A lot of folks like the POR15. Some prep work to deal with though.

A hi-lift is handy, but not required. A good bottle jack and a stand or one of those combo units are probably more useful unless you are willing to winch with your hi-lift. I have both FWIW..
 
13ADVX

13ADVX

Bought an X
Location
PA
if you do get a hi-lift its worth the extra >$100 to get the base pad and the slider attachment for the jack.
ESxaMmd.jpg
 
TheCrabby1

TheCrabby1

I Smell Fishy
Supporting Member
Location
Burtonsville, Md
TerryD said:
S5 should fit the small or large phone X-Grip. I have the large for my S7 but it fit the small I use for my radio head unit as well. It takes the large for my S20 though. My 7" tablet just fits in the large, I'll need the tablet version of I go bigger than 7".
Click to expand...
Ole lady just said her phone is not grabbing the wifi at work like it should/or use to, so now WE can go and upgrade OUR phone's so I'll hold off on the holder till that happen's. Thanx 4 the info..........
 
Last edited:
harryron

harryron

The Grumpiest of Mid-Westerners
Location
ohio
CHUG said:
they say wabbits are cute and harmless.. Bullscat.. I watched one Rip a mans throat out!!.. Mean little buggers
Click to expand...
They are mean ufckers if they want to be. Two of the bucks we had got loose once and the one buck damn near bit the other bucks nuts off. Then you have the does if they want to they can be territorial and if they have a bad attitude they just go after anything that moves. My daughter warns me every time I try to pet our one doe that she will bite me.
 
Status
Not open for further replies.
Top