- Location
- Burtonsville, Md
Okay the cutting board/divider has rounded edges and if I measure the width just at the start of the round on the side the top is 12" the bottom is 11 3/8" and the basket is 12"at the top where it sit's on the ledge. Does ur's have the slot in the middle ??
Can we rename your X "" RUDOLF"" for the holiday season LolView attachment 16078
Some more "offroading" lights
And for today's installment [ that's a hint for Kirk ] Lol !!
Installed cabin air filter's , this is the first time I changed them. Look how badly someone before me jammed them in therea little finesse and they go right in. I bet Odo's interior fan is happy to breath again ; look at the amount of crap in there
Also put a rubber truck bed liner in . Just got tired of $hit sliding around the $hip . It's a 2nd/some defect's but for $70 incl shipping it'll get worse before I'm done with it View attachment 16073 View attachment 16075 View attachment 16076
I think I read it in ur build thread and that light bulb above my head turned on Or it could've been someone else's !! I guess there's a dimmer switch on my light bulb .......LolThe truck bed mat is still one of the best things I ever did for my xterra.
Nice . almost make's me rethink putting my roof rack back on ...........................................................almost . LolJust impulse bought an Ironman awning for $199. No added tax or shipping costs. https://ironman4x4america.com/instant-awning-with-led-lighting-dimmer-2m-x-2-5m/
That's the first song I learned all the way thru on the geetfiddle..These would be in the category of what did you do to your X View attachment 16062 View attachment 16063
2 New sticker's ; the first is Henry , the BLACK SABBATH mascot
2nd speaks for itself ....
It make's a thumping type noise when you start the vehicle like it's a vacuum leak then it goes away . It's been doing this for 18 month's but It still worked heat/AC wise; I thought I'd try a cheap fix first , at least it was super easy to replace the resistor and the motor is right next to it if need be.Might be the blower motor itself. Mine was making quite a racket when it went. When it was working...
Theres an issue with the blend door on these that what you're describing sounds like. Might look into that? I can't remember what you have to do but it is something about it trying to seek out a home position and not finding it so it slips its gears.It make's a thumping type noise when you start the vehicle like it's a vacuum leak then it goes away . It's been doing this for 18 month's but It still worked heat/AC wise; I thought I'd try a cheap fix first , at least it was super easy to replace the resistor and the motor is right next to it if need be.
What lights are you going with?
Thanx TerryD . When I input blend door/ticking/thumping nissan xterra cabin noise I found some you tuber's video's of the same noise . Can be fixed with a zip tye . My kinda price.Theres an issue with the blend door on these that what you're describing sounds like. Might look into that? I can't remember what you have to do but it is something about it trying to seek out a home position and not finding it so it slips its gears.
I miss that horribly annoying banging sound already.Thanx TerryD . When I input blend door/ticking/thumping nissan xterra cabin noise I found some you tuber's video's of the same noise . Can be fixed with a zip tye . My kinda price.
What lights are you going with?
Have you looked into Roadshock from Harbor Frieght ? The 8 & 22 inch bar's have received decent rating's and you can return to store if needed.. Think I'm gonna grab a 22" bar and check it out .....I bought some like the link below back in March, will probably see how they pan out. If no good may look into non no-name options.
https://www.ebay.com/itm/2x-7inch-L...909235&hash=item3fef4dbcdb:g:S34AAOSwrWhc9NYQ
I bought some like the link below back in March, will probably see how they pan out. If no good may look into non no-name options.
https://www.ebay.com/itm/2x-7inch-L...909235&hash=item3fef4dbcdb:g:S34AAOSwrWhc9NYQ
I must say I like the smaller light's , they look like they were made to fit in there ! Well I did a H.F. drive-buy and snagged a 22" bar and a wiring kit and here's what I can say . When I go to HF I am buying disposable tool's I can beat the $hit out of , break or lose and my feeling's don't get hurt at all because I know what I'm buying !! I was surprised at the weight of the box at the store and when I got home and took the light out I was really surprised . This thing is heavy , it appears to be an ALL aluminum housing with 20 set screw's holding the lens's cover on top of the 40 light's with a nice fit and finish to it. If it work's as good as it look's I'll go get another 1 or 2. If it don't work that good or last a couple year's it's no biggie , hell my bar tab's are at least this much up to twice as much . Maybe I'll sneak up behind Jay and light up his new awningInstalled the awning today with the help of some pretty nice brackets from Gzilla.
View attachment 16207 View attachment 16208 View attachment 16209
Then replaced my cheapy round "pods" with SS3 pods from Diode Dynamics. Can't wait to take it out at night and see how it will throw light on the trail.
View attachment 16210 View attachment 16211 View attachment 16212
I must say I like the smaller light's , they look like they were made to fit in there ! Well I did a H.F. drive-buy and snagged a 22" bar and a wiring kit and here's what I can say . When I go to HF I am buying disposable tool's I can beat the $hit out of , break or lose and my feeling's don't get hurt at all because I know what I'm buying !! I was surprised at the weight of the box at the store and when I got home and took the light out I was really surprised . This thing is heavy , it appears to be an ALL aluminum housing with 20 set screw's holding the lens's cover on top of the 40 light's with a nice fit and finish to it. If it work's as good as it look's I'll go get another 1 or 2. If it don't work that good or last a couple year's it's no biggie , hell my bar tab's are at least this much up to twice as much . Maybe I'll sneak up behind Jay and light up his new awning
And the grill slot win's View attachment 16226
When ,what and where ?? Hadn't heard anything about a run ? it's just mounted haven't hooked it up yet , got too cold out yesterday.Sweet. Bringing it out Saturday to test it on the trail?
When ,what and where ?? Hadn't heard anything about a run ? it's just mounted haven't hooked it up yet , got too cold out yesterday.
How bout just lightly sand/clean and paint the frame between your wheel's b 4 install. I did that before my install so now I have from the tire's to the end's to do. Then again your's might not be as bad as mine being 9 years older.Bedliner done! Countdown to installation is started. Given the 10" of snow forecasted for Wednesday and probable 2" of salt and chemical that will be on the road, I probably won't install until next weekend if I can get the frame nice and clean.
View attachment 16288 View attachment 16289