caseycamby
Suspension Lift
- Location
- Marion, NC
First gen passenger taillight! Please and thank ye!
same here I need them stillI need both rear tail light housings for a 1st gen If anyone has a pair
You're better off buying from Rock. Ceapest in Abq is $180 for the pair. You'll have to go as far out as El Paso to get a good deal.I need both rear tail light housings for a 1st gen If anyone has a pair
A & AM in Union has a pair for $60 -- 931-294-3422same here I need them still
same here I need them still
the pull a part in greer, sc has '01 with AC lift shackles and 3 SC wheels if anybody is interested.
If anybody runs across a 5 speed first gen 4x4 let me know, I'm wanting to get stuff together to 5 speed swap my truck.
I want to say yes.Does the late 90's Pathfinder use the same tranny?
Does the late 90's Pathfinder use the same tranny?
I want to say yes.
Though I'm not sure if the ratios are the same.
Also, Mirage, 5speed swap ftw!
Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.
I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.
Too awesome.Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.
I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
Don't want to tell you not to do it, just information. If you haven't yet take a look under the dash at where the clutch pedal mounts. I'm not sure it's possible to hang a pedal in there without taking the dash apart.
I'm not too worried about that, all my Aux wiring goes through the clutch MC blanking plate so i've been down there, but it also means I have to redo my wiring when I do all this, pulling the dash will let me clean it up even more. I've manual swapped a B13 SE-R and an S14 240SX before. As soon as tax return comes in i'm going to try and start gathering parts.
Just letting you know what's out there. Good luck on the search.
Why do you need a hood?