XN Junk Yard Request Thread

Muadeeb

Muadeeb

Nissan al Gaib
Admin
Location
Dallas
J&T Autoparts -- 241 MAJOR CONLEY ROAD No price listed but Norman's of Shelby (2026 Elizabeth Ave, Shelby NC) has one as well for $25
 
Mirage

Mirage

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Greenville SC
the pull a part in greer, sc has '01 with AC lift shackles and 3 SC wheels if anybody is interested.

If anybody runs across a 5 speed first gen 4x4 let me know, I'm wanting to get stuff together to 5 speed swap my truck.
 
TheFauxFox

TheFauxFox

Titan Swapped / SAS'd
Founding Member
Location
Huntsville, AL
Mirage said:
the pull a part in greer, sc has '01 with AC lift shackles and 3 SC wheels if anybody is interested.

If anybody runs across a 5 speed first gen 4x4 let me know, I'm wanting to get stuff together to 5 speed swap my truck.
Click to expand...

Does the late 90's Pathfinder use the same tranny?
 
Mirage

Mirage

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Greenville SC
TheFauxFox said:
Does the late 90's Pathfinder use the same tranny?
Click to expand...

Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.

Prime said:
I want to say yes.

Though I'm not sure if the ratios are the same.

Also, Mirage, 5speed swap ftw!
Click to expand...

I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
 
TheFauxFox

TheFauxFox

Titan Swapped / SAS'd
Founding Member
Location
Huntsville, AL
Mirage said:
Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.



I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
Click to expand...

I ask because the Birmingham and Nashville PAPs both seem to have a manual Pathfinder or Xterra in their lots. Of course, I have no idea how picked over they are.
 
Muadeeb

Muadeeb

Nissan al Gaib
Admin
Location
Dallas
Mirage said:
Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.
Click to expand...

FSMs on Nico show they use the same tranny (FS5R30A) with the same gearing.
 
Prime

Prime

Shut up Baby, I know it!
Admin
Location
Denver Adjacent
Mirage said:
Same trans, probably has some minor differences, been keeping my eye open for those too, everything in my 2 pull a parts is automatic and I'm bored with it. Specifically looking for the clutch and brake pedals, clutch master cylinder, shifter assembly and trim (Gen 1.5), trans/tcase (?), flywheel and tranny side wiring harness. Gonna try and keep the auto parking brake/release, I hate that setup in the manual trucks.



I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
Click to expand...
Too awesome.
 
P&P

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
Mirage said:
I hate automatics and don't want to spend the money doing a performance rebuild on this thing. That and i'm trying to keep this an all manual transmission family, recently bought the wife a new 6 speed sentra
Click to expand...


Don't want to tell you not to do it, just information. If you haven't yet take a look under the dash at where the clutch pedal mounts. I'm not sure it's possible to hang a pedal in there without taking the dash apart.
 
Mirage

Mirage

<img src="http://i164.photobucket.com/albums/u7/ra
Founding Member
Location
Greenville SC
P&P said:
Don't want to tell you not to do it, just information. If you haven't yet take a look under the dash at where the clutch pedal mounts. I'm not sure it's possible to hang a pedal in there without taking the dash apart.
Click to expand...

I'm not too worried about that, all my Aux wiring goes through the clutch MC blanking plate so i've been down there, but it also means I have to redo my wiring when I do all this, pulling the dash will let me clean it up even more. I've manual swapped a B13 SE-R and an S14 240SX before. As soon as tax return comes in i'm going to try and start gathering parts.
 
P&P

P&P

Need Bigger Tires
Site Sponsor
Location
Middle TN
Mirage said:
I'm not too worried about that, all my Aux wiring goes through the clutch MC blanking plate so i've been down there, but it also means I have to redo my wiring when I do all this, pulling the dash will let me clean it up even more. I've manual swapped a B13 SE-R and an S14 240SX before. As soon as tax return comes in i'm going to try and start gathering parts.
Click to expand...

Right on. Just wanted to put it out there so you weren't surprised when you dug into it.

Hanging a 3rd pedal in an rx8 was a cake walk.


Sent from my iPhone using Tapatalk
 
J Everett

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
If anybody sees any 2nd gen Xterra/Frontier steel spare wheels for cheap, let me know. I'm looking for three for a future trailer project.
 
Last edited:
Muadeeb

Muadeeb

Nissan al Gaib
Admin
Location
Dallas
LKQ in Livingston has some for $105ea (225-686-3733). A&B in Amite has a better deal of $60, but it's further out (800-662-2710).

Those are the closest two, beyond that you're looking at 120+ miles.
 
J Everett

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
Amite and livingston are close enough that $60/ea is well worth the extra drive. Thanks!

If I may, how are you searching and how did you find that so fast?
 
obi_krash

obi_krash

Suspension Lift
Location
Richmond, VA
Looking for a 2nd gen hood, somewhere in VA.

I know that would be too large to ship or anything, but if anyone has any leads on a 2nd get being parted out or something like that - I need the hood.
If it's Night Armor, even better. If not - meh, I will end up covering it with a vinyl decal eventually, or painting it.
 
Muadeeb

Muadeeb

Nissan al Gaib
Admin
Location
Dallas
obi-140218.png

Anything else?
 
obi_krash

obi_krash

Suspension Lift
Location
Richmond, VA
Well Deeb . . .
I will go back and do some more research.

It's not a rush thing, the lady has just been saying it looks like poo (it does, it's been dented already and the bedliner is all coming off and crap) and I was hoping to find one on the cheap side, like from someone parting out their rig or something.
 
You must log in or register to reply here.
Top