- Location
- Smyrna, TN
OIL CHANGE TODAY!!!
Pennzoil oil and filter FTW!
Pennzoil oil and filter FTW!
- Location
- Amarillo, TX
lol no, I didn't even wait for mine to wear out....in fact, I'll sell you my old ones if you want, they're a size up from yours and they're at least an AT instead of a highway oriented tire mac
CHEAP they are too only 7500-8000 miles on em...
- Location
- SW OK & formerly Eastern NM
lol no, I didn't even wait for mine to wear out....in fact, I'll sell you my old ones if you want, they're a size up from yours and they're at least an AT instead of a highway oriented tire mac
Haha, at the moment I'll be lucky to buying much of anything for a bit :Sleepies:
- Location
- Amarillo, TX
psh, tell her it's a safety measure for when you're driving her and the baby around
oh, and it gets em out of my garage so I have a place to work on some sliders
- Location
- Bowling Green, KY
I think RATT has something to show off
- Location
- Pearl, MS
Yes, pics are in order Ratt. The Green Monster is gonna look awesome with an ARB.
- Location
- Conroe, TX
BAM!
JE and I slapped an ARB on
Ghetto gap and all.
JE and I slapped an ARB on
Ghetto gap and all.
- Location
- Pearl, MS
The Monster looks good RATT! Congrats on the new bumper!
- Location
- Conroe, TX
ThanX bud!
- Location
- Woodstock, GA
Righteous, RF, it looks freaking awesome!! And Ghetto Gap keeps yer body panels from getting crunched, ya know?
- Location
- West Haven, UTAH
Installed my LED tail lights yesterday and new LED backup lights.
Thread here: http://www.xterranation.org/showthread.php?960-Maxterra-s-Build-Thread&p=18911&viewfull=1#post18911
Out loading up and prepping for the UXOC Pony Express run in the morning. What else am I forgetting to do & load....:questions:
Thread here: http://www.xterranation.org/showthread.php?960-Maxterra-s-Build-Thread&p=18911&viewfull=1#post18911
Out loading up and prepping for the UXOC Pony Express run in the morning. What else am I forgetting to do & load....:questions:
NMTerras
Suspension Lift
- Location
- New Mexico
removed yakima ski rack from terra's crossbars, mounted them on terrance and went skiing. Powder day, woo hoo!
- Location
- Amarillo, TX
rolled over the 20K mark on Jekyll-X's odometer... I snapped a commemorative picture....one at 19,999 and one at 20,000
- Location
- Bowling Green, KY
Muddy truck day is tuesday at school and we are suppose to have 2-4" of snow tonight and tomorrow so I knew if I waited to go mudding then I would get stuck so I went today. Only got stuck one time and I put some boards behind the rear wheels gave it to the pedal and I was out!!
jmnielsen
Need Bigger Tires
- Location
- Lincoln, NE
Got bored at work so tried doin a little flexin!
Some decent stuffage here
Sorry for crappy pics, not sure why tapatalk doesn't upload them quite right.
Some decent stuffage here
Sorry for crappy pics, not sure why tapatalk doesn't upload them quite right.
Last edited:
idratherbe
Skid Plates
- Location
- North Shore, MA
Got 10 orange and 10 white prewired superflux Leds from Oznium.com today. I'm up to something..stay tuned..
- Location
- Western Massachusetts
BAM!
JE and I slapped an ARB on
Ghetto gap and all.
Looks awesome man, congrats!
Muddy truck day is tuesday at school and we are suppose to have 2-4" of snow tonight and tomorrow so I knew if I waited to go mudding then I would get stuck so I went today. Only got stuck one time and I put some boards behind the rear wheels gave it to the pedal and I was out!!
Muddy truck day?! This is totally something my high school should have had, wtf!
Awesome, I love their stuff. I've got a mess of prewired super bright LEDs from them but I can't decide where to put them. I have some ideas but I need to get over the whole "I don't know if I want to put a hole there" thing.
Anywho, today for my X I checked fluids, climbed underneath and gave everything a tug and a pull, looked for anything obvious that might be saying "Hey, I'm gonna fall off in a week or two if you don't fix me". Happy to report everything looks to be in tip-top shape.
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
Muddy truck day is tuesday at school and we are suppose to have 2-4" of snow tonight and tomorrow so I knew if I waited to go mudding then I would get stuck so I went today. Only got stuck one time and I put some boards behind the rear wheels gave it to the pedal and I was out!!
How funny is all your sides are muddy yet your mirror manages to stay clean lol.
idratherbe
Skid Plates
- Location
- North Shore, MA
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
Filled up with gas and installed gps docking station today. Since it was warm outside.
- Location
- Bowling Green, KY
Change your offset a little and you'll really get the sides dirty
You mean the back spacing? If I don't get bigger tires ill for sure get back spacers so the wheels sit out of the wheel well.
Its FFA week thats how its muddy truck day!
My guess about the mirror is since I'm 4x2 and can't spin the front tires it didn't throw mud that high but the bak tires did in reverse
- Location
- Bowling Green, KY
any idea whats causing this? Im thinking its cause I went mudding yesterday but there isn't that much mud on the belt. I even poured some water over it. Im thinking of driving it to dry it out and then spraying a little wd40 on it.
[video=youtube;qYNnUqfDPfA]http://www.youtube.com/watch?v=qYNnUqfDPfA&feature=plcp&context=C3b84586UDOEgsToPDskJibeb-msyDz2tCcThq8y3d[/video]
[video=youtube;qYNnUqfDPfA]http://www.youtube.com/watch?v=qYNnUqfDPfA&feature=plcp&context=C3b84586UDOEgsToPDskJibeb-msyDz2tCcThq8y3d[/video]
- Location
- Bowling Green, KY
there is no mud on the alt. I think a belts just slipping...ill spray wd40 on it
NMTerras
Suspension Lift
- Location
- New Mexico
- Location
- Bowling Green, KY
Will be doing a GOOD GOOD wax this week on the X.. Temps supposed to be right at 70, possibly. So, this means a good winter breakdown, as we detailers call it. Oh, and changing the oil too.
Oh, and changing the oil too.
NMTerras
Suspension Lift
- Location
- New Mexico
OK so clearly the pics you can post through tapatalk are WAAAAAy to small...
- Location
- SW OK & formerly Eastern NM
Haha, agreed. I didn't notice that since I was on my phone.
- Location
- Amarillo, TX
Will be doing a GOOD GOOD wax this week on the X.. Temps supposed to be right at 70, possibly. So, this means a good winter breakdown, as we detailers call it.
feel free to come do mine too....it needs it....
jmnielsen
Need Bigger Tires
- Location
- Lincoln, NE
Put some extended shackles on that i painted and bought new grade 8 hardware for and gave it a nice wash. The shackle install would have take 30 minutes, but on nut was rounded off, so after trying a nut splitter and then a chisel I said screw it and bought a dremel tool with some cutoff wheels. So between the dremel and chisel I got it off!
Attachments
- Location
- SW OK & formerly Eastern NM
Put some extended shackles on that i painted and bought new grade 8 hardware for and gave it a nice wash. The shackle install would have take 30 minutes, but on nut was rounded off, so after trying a nut splitter and then a chisel I said screw it and bought a dremel tool with some cutoff wheels. So between the dremel and chisel I got it off!
Nice, that looks really good. And talk about dedication, now you've got a dremel too too. I wonder if I could get away with that excuse.....
jmnielsen
Need Bigger Tires
- Location
- Lincoln, NE
Haha yeah that's been my excuse for lots of tools! "well I ran in to a snag, looks like I need to go get a new tool"
- Location
- Pearl, MS
I love my Dremel, I use it for everything. Speaking of which, I used it to raise my front bumper on Sunday. I ended up doing a good bit of trimming with it but now all of my trim is back on and the front end looks stock again (besides being 2" higher and having 33's). Will post pictures soon.
- Location
- Bowling Green, KY
went from the pics on the last thread to this one below! I went to the car wash and they were having trouble with the soap part of the wash and told me my self wash was free lol well I had to of used the thing for 10-15 minutes until the guy cut me off lol so I only spent 2 dollars to wash it!!
In this pic I'm using my sprinkler to wash out the nasty under body...im also waiting til the engine cools off to do that part.
In this pic I'm using my sprinkler to wash out the nasty under body...im also waiting til the engine cools off to do that part.
Last edited:
- Location
- Smyrna, TN
Tires rotated, balanced, tire patched from the inside and an ALIGNMENT! Holy gobble it was out of whack..
- Location
- Winlsow Twsp, NJ
The rear driver tire looks like your either parked on a hose or the holy man is shining down and blessing your truck for being so clean. lol
TN4x4Xterra
Suspension Lift
- Location
- Knoxville, TN
went from the pics on the last thread to this one below! I went to the car wash and they were having trouble with the soap part of the wash and told me my self wash was free lol well I had to of used the thing for 10-15 minutes until the guy cut me off lol so I only spent 2 dollars to wash it!!
In this pic I'm using my sprinkler to wash out the nasty under body...im also waiting til the engine cools off to do that part.
That is why I despise and absolutely hate mud....its a PITA to clean. When I took my 2001 to CC that mud-caked run, it took 2 full days to clean it all up, and I was still dropping chunks of mud afterwards from the SW skids....
LOL I was thinking the latter!
- Location
- Amarillo, TX
well, today's going to be a multi-mod day...
#1: replaced the broken CB antenna, running the cable properly (this SUCKED, and I need about a 2' extension to really have it fit the way I want it to)
#2: transmission/radiator cooler bypass, I'm going to grab as much detail as I can on this on my playbook, put it in a gallon ziploc bag, and go out and knock it out in a couple minutes.
#3: tip and spray....the underside is still muddy as hell from the last time I went wheeling....two jacks and a power washer will change that after the tranny job is done.
#4: re-wash the X....obviously if I'm gonna wash under it I may as well wash the body as well.
#5: finally installing my XN and supporting member stickers.
pictures to follow after I get it all done.
#1: replaced the broken CB antenna, running the cable properly (this SUCKED, and I need about a 2' extension to really have it fit the way I want it to)
#2: transmission/radiator cooler bypass, I'm going to grab as much detail as I can on this on my playbook, put it in a gallon ziploc bag, and go out and knock it out in a couple minutes.
#3: tip and spray....the underside is still muddy as hell from the last time I went wheeling....two jacks and a power washer will change that after the tranny job is done.
#4: re-wash the X....obviously if I'm gonna wash under it I may as well wash the body as well.
#5: finally installing my XN and supporting member stickers.
pictures to follow after I get it all done.
- Location
- Winlsow Twsp, NJ
Ordered new bushings for my squeaky control arms. Also put money aside to order me some Rugged Rock Sliders :smile:
