What have you done for your X?

XTP_Dyer

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
Drove to Cincinnati after work and picked up some front and rear seat covers!

wsww20.jpg
 
Shizane2002

Shizane2002

First Fill-Up (of many)
Location
Alexandria, Virginia
Great success with adding anti-glare stripe on my hood with Dupli-color Bed Armor. I went on ahead and did the front bumper, grill, side plastic trim pieces. Turned out significantly better than plasti-dip three months ago. I imagine it will hold up better than plasti-dip as well.


20150721_182728_zps1ztrzs3z.jpg


20150722_122530_zpsq1xpbgzb.jpg
 
XTP_Dyer

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
Prime said:
So you got the new ones that they guy selling the non runner had?
Click to expand...

That I did! They had to be one of the most difficult Craigslist experience I've ever had. First, I asked if they would ship and do payment via paypal if I covered shipping...I didn't hear from them for three days and even sent a followup email. Then, I offered to drive and they wouldn't respond...So, I had to send an email from a friend's email and offer to come get them and even then, they wouldn't give the address of where to meet, they just keep saying "At the shell west of Cincinnati"....when I asked for the address before I left, they said it wouldn't work out...So i just lied and said I would be there in an hour...................................I ended up guessing on the right gas station. Holy heck.
 
G

gots_a_sol

Bought an X
Location
Charles Town, WV
Sold it to my neighbor's daughter. I bought a big Ex (needed the seating and ability to pull my enclosed trailer) and having 2 suvs that got similar fuel mileage was a bit redundant, so the little X had to go. Replaced it with a jetta tdi. 40+ mpg is nice.

I put the stock wheels/tires back on it and as soon as I find an auto hub, will pull my warns off of it to sell along with a set of lift shackles I bought but never installed.

20140309_111224_zpsploolc7s.jpg


IMG_20150614_140214_zpsegbhqluk.jpg
 
Fromfrontier2Xterra

Fromfrontier2Xterra

I bought a Taco
Super Moderator
Supporting Member
Location
All over PA
Redid my awning brackets. Bumped up to a thicker steel. Last time at rausch my brackets bent some from the jaring around on the trails.

Sent via my walkie talkie
 
Macland

Macland

Titan Swapped / SAS'd
Founding Member
Location
SW OK & formerly Eastern NM
I repainted my grille. I did the honeycomb a dark red but I'm not sure if it's gonna stick.

I also vacuumed out and cleaned everything on the inside. I found sand from years ago!
 
556Tactical

556Tactical

First Fill-Up (of many)
Location
Florida
Stickers, 24" led light bar, and red led interior cluster and gear indicator lights. Also if anyone is wondering about the temp tag it's not new I just had to get a Michigan plate instead of Florida
0fcb1aebda68f8b66602cca77b2a51d2.jpg
2727b998d94d6bcf576aa59598f44a07.jpg
435a7cbbded826cd4586d511100a3ef2.jpg
8c608f9ab44c442abb10e5f4f27a077f.jpg
731733903f160e62677a139f3642bb8b.jpg



Sent from my Xterra
 
Thanks48

Thanks48

Bought an X
Location
Chattanooga , TN
Just did new rotors,brakes,studs,lugs, and replaced the cv axle shaft I broke last weekend. Getting steel wheels this Friday to get rid of these crappy mag wheels(lugs keeping coming loose)
 
TheFauxFox

TheFauxFox

Titan Swapped / SAS'd
Founding Member
Location
Huntsville, AL
You're going to want to respool that line relatively soon or replace. Additionally, be wary of the solenoid. Two of my buddies have them: one had to replace a solenoid, the other had the replace the solenoid and ¿clutch?.
 
XTP_Dyer

XTP_Dyer

First Fill-Up (of many)
Location
Nashville
TheFauxFox said:
You're going to want to respool that line relatively soon or replace. Additionally, be wary of the solenoid. Two of my buddies have them: one had to replace a solenoid, the other had the replace the solenoid and ¿clutch?.
Click to expand...

Respool - Yes
Replace - No

The line is fine; no snags or damage. As for the Solenoid, that tends to be the case with any lower end winch..It's not uncommon to have an issue. Right now, it works fine. No complaints on my end.

I would love to swap to a synthetic line, but that's definitely not a concern right now. The winch will do its job for the time being.
 
Last edited:
Malin_Rebate

Malin_Rebate

Skid Plates
Location
Tennessee
I bought a drop hitch a hilift and installed rear LEDs
53678ebd972461a8dee666a4c69cefbc.jpg


I jumped a guy with a dead alternator on an exit ramp yesterday
379619dd2d5d09e5b10ff0b00f47b1f0.jpg






Sent from my iPhone using Tapatalk
 
GPD605X

GPD605X

Lockers Installed
Founding Member
Location
Gulfport, MS
Noticed my Totron light bar had some condensation building up inside the far right side. Snapped some pics and contacted Extreme LED. Should be getting fixed or replaced for free. Just waiting on a response from them.
8383f45a2ad8db718a1d0941eb2229dc.jpg
09ebddfd25182d1bc153c27645f5ebf3.jpg



Sent from my couch
 
556Tactical

556Tactical

First Fill-Up (of many)
Location
Florida
Anybody know how to fix led bars. 3 LEDs went out. I contacted where I bought them from and they are sending me a new bar for free and I get to keep this one. But if someone can tell me how to fix it the I'll have to bars for the price of one.

So 2 24" bars for $50 sounds like a large slice of awesome pie


Sent from my Xterra
 
You must log in or register to reply here.
Top