So. $1000 later. New clutch, fresh oil change, transfer case seals and fluid change, 5th and 6th spark plugs changed (couldn't get them out at the last tuneup).
Got to work today in went prep.
Rebuilt my winch. The inside looked like this.
I beat down all the rust. Cleaned all the metal. It was a mess. I'm thinking one of the terminals developed a leak and the motor just filled with water. Now that it's been cleaned out and reassembled, there's so much silicone on everything there's no way it can leak. Unfortunately, it's out of warranty for the electrical stuff, so I'm on my own there.
Got it all bolted in and tested. Works like a champ.
Problem though.
My relay is dead. So the only way to operate the winch is by touching the battery cables together.
So I'm going to call a company in Arizona and see if they can overnight me a new one on Monday.
Also started reassembling the center console and getting my wiring sorted. Tuned my CB antenna.
Last for today was installing the backup camera in the rear bumper.
The location may not be ideal. But time will tell. It shows the spare in the image which is something I really wanted. Tomorrow I'll go test it and see how the colored lines work in the real world.
Tomorrow the center stack goes back in and the interior gets completely cleaned and vacuumed out.