<br><br>If you dont mind.. Im in need of them badly..
Link for cool seat covers
I have a buddy that works for 4wd.com that can get you a deal I think on there
NismoFire's 2002 SE Build
- Thread starter NismoFire
- Start date
Link for cool seat covers
I have a buddy that works for 4wd.com that can get you a deal I think on there
- Location
- SW OK & formerly Eastern NM
links broken on my end
- Location
- Smyrna, TN
Not a problem at all. I get off at 3, so I'll head over there then.
Molle seat covers?! OMG I think I just died and went to heaven...
- Location
- SW OK & formerly Eastern NM
<br><br>If you dont mind.. Im in need of them badly..
Link for cool seat covers
I have a buddy that works for 4wd.com that can get you a deal I think on there
What size do you figure for the 2nd gen?
- Location
- Smyrna, TN
Look what I just came home with...
Just gotta buy one more can of Krylon. I wiped O'Reilly out of the satin, so I'll have to go Sunday on my way to DRB's casa (mad props to Dave for helping me out).
Just gotta buy one more can of Krylon. I wiped O'Reilly out of the satin, so I'll have to go Sunday on my way to DRB's casa (mad props to Dave for helping me out).
- Location
- Conroe, TX
Nice X!
Look what I just came home with...
Just gotta buy one more can of Krylon. I wiped O'Reilly out of the satin, so I'll have to go Sunday on my way to DRB's casa (mad props to Dave for helping me out).
Walmart sells it too
- Location
- Smyrna, TN
- Location
- Bloomington, Indiana
If you are going to buy two seats and can't find the ones that match, ask the pull-a-part yard if they want to trade all four seats plus some cash from you. Problem solved and all four seats match and the yard gets more junk to sell to the next guy.
- Location
- Smyrna, TN
I think I'm gonna wait and put those badA Molle covers on...gotta come up with an extra $100 first, though.
- Location
- SW OK & formerly Eastern NM
Are you sure it's not $100 per seat?
- Location
- Smyrna, TN
My luck, they probably are.
- Location
- Nesquehoning, PA
Lookin good. You're gonna love the way it looks after you paint the plastics.
Last edited:
- Location
- Conroe, TX
Nismo is a chick, if I remember correctly... A chick with a sweet X.
Sent from my HTC Thunderbolt thru Time and Space, using Tapatalk.
Sent from my HTC Thunderbolt thru Time and Space, using Tapatalk.
- Location
- Smyrna, TN
It's all good, Ratt...I'm just one of the guys.
Thanks, though.
Thanks, though.
- Location
- Nesquehoning, PA
I apologize. Force of habit. My previous post was edited to correct my ignorance.
- Location
- Smyrna, TN
- Location
- Smyrna, TN
HUGE THANK YOU to Dave (drbandkgb) for his much-needed help today, but look what we did!!!
Dave working while I observe...there's a reason I didn't paint!
Headlight bezels and grill center drying
Not so finished product
Unfortunately, we ran out of daylight. I stopped by my parents' house on my way home and Dave did such a great job that my dad thought I had a body shop do it!
I won't have all of the plastics painted by Xs for Xmas, but at least the grill and headlight bezels are done. I'm not putting the brush guard back on there, but once I get the brackets off, I'll be putting it up for sale.
Again, a big THANK YOU goes out to Dave B for pretty much doing this for me..I helped with the removal, but I can't paint.
Dave working while I observe...there's a reason I didn't paint!
Headlight bezels and grill center drying
Not so finished product
Unfortunately, we ran out of daylight. I stopped by my parents' house on my way home and Dave did such a great job that my dad thought I had a body shop do it!
I won't have all of the plastics painted by Xs for Xmas, but at least the grill and headlight bezels are done. I'm not putting the brush guard back on there, but once I get the brackets off, I'll be putting it up for sale.
Again, a big THANK YOU goes out to Dave B for pretty much doing this for me..I helped with the removal, but I can't paint.
- Location
- SW OK & formerly Eastern NM
Looks brand new
- Location
- Conroe, TX
The X family is a sweet one. Looks good.
Sent from my HTC Thunderbolt thru Time and Space, using Tapatalk.
Sent from my HTC Thunderbolt thru Time and Space, using Tapatalk.
- Location
- Smyrna, TN
I was about to post before/after pics! Thanks for doing it for me lol.
- Location
- Central FL
Lookin good!
- Location
- Signal Mtn., TN
It's amazing what some time and a few cans of paint will do. By the way, are the headlight bezels hard to remove? I'm going to be blacking out my grill soon.
- Location
- Nesquehoning, PA
The headlight bezels are easy, so is the grille. For the headlights it's just 2 screws and a couple of tabs. (two I think) and for the grille you just need a flathead screwdriver. You simply turn the plastic squares until they line up with the square on the grille. But they aren't screws so don't keep turning them. 1/8 of a turn is all you need. It was actually more of a pain putting the clips back on the grille than taking them off.
- Location
- Signal Mtn., TN
Thanks. I took the grill out to paint it gray last year, I just didn't do the rest for some reason. I remember calling the clips a few bad names putting them back in but it wasn't bad. Now if I can just get home before dark on a day when it's not raining I'll have it made.
- Location
- Smyrna, TN
Dave and I would have done a write-up, but we were REALLY pressed for time. I have to sand and re-paint the bezels again, so if I can get to it before you, I will do a write-up on it.
- Location
- Smyrna, TN
- Location
- Smyrna, TN
Mastercraft is a VERY strong tire. I put 40,000 on a set of ATs on my Hardbody, including some pretty regular offroading..I love em.
Now I gotta find some of the Frontier 15s like what Dave used to have on Turk (but the smoked color, not the bright silver).
Now I gotta find some of the Frontier 15s like what Dave used to have on Turk (but the smoked color, not the bright silver).
- Location
- Smyrna, TN
I know...I see them for an arm and a leg on eBay..wish I could just trade someone even, but mine are 16s.
- Location
- Carlisle, Iowa
What size will you get?
- Location
- Smyrna, TN
32x11x15...they don't make a 11.5, according to their website. I won't need anything bigger than that, but it would look goofy if I got 31s after a lift.
- Location
- Carlisle, Iowa
at one time we all have said this but yet we all end up with 33's lol
- Location
- Central FL
Liar...lol
Sent from my beer soaked mind...
Sent from my beer soaked mind...
- Location
- Smyrna, TN
Eh, I want it to look like it should have when it rolled off the line...plus, I don't do that much offroading anyway. More snow-roading.
- Location
- Smyrna, TN
I got bored at work today....drew my truck with the bumper that I want...
I'll probably wind up doing it myself, since I don't have $800 to cough up for a bumper from RLC. Might have to borrow a welder from somebody *cough*DAVE*cough* since Daddy got rid of his when he got is pacemaker.
I'll probably wind up doing it myself, since I don't have $800 to cough up for a bumper from RLC. Might have to borrow a welder from somebody *cough*DAVE*cough* since Daddy got rid of his when he got is pacemaker.
- Location
- Pearl, MS
So this is where everyone's been hanging out. I see why too. Nice build Nismo, the paint job on the grill looks orders of magnitude better than before. Dave, you are too nice!