Cptpackrat
Bumpers Installed
- Location
- Gillette WY
I seriously need to make a run down that way and hit some of the yards. Those hubs turned out damn great and a fresh coat on the outside and some good grease on the inside and you will be set!
Well snow is here and I think it might be time to fix my abs. I have never owed a car with abs but my wife has it and I guess it's nice. The wire thing is it will work sometimes but normaly not. The light shut off when the battery got disconected the other day but it kicked in as soon as I hit the breaks leaving the autozone parkin lot and then the light came back on so I think it's one of the sensors is dirty
Sent from my SM-G900V using Tapatalk
Big bummer today. Whent to swap hubs and I miss counted the splines. The hubs are 27 while my truck is 28. Guess I'll be selling my hubs and buying warns
Sent from my SM-G900V using Tapatalk
So my miss fire came back today, but much less severe. It will miss for a little but then levels out and runs fine. I think I will be swapping the fule filter in the next cople of days now that it has been warm enough to melt some of the ice off the bottom of the truck. It dosnt smell like gas when it misses so I think it's a fuel issue now, maby I flushed gunk in to the filter when I used a fule treatment. Going through the last owners records I am not finding any thing about the filter being changed.
Sent from my SM-G900V using Tapatalk
That's how you did it on my old 4runner otherwise you sprayed gas allover the engine. The misfire is driving me nuts as its not constant. I can drive for a week without a miss and then it will do it for a day then be gone again. I'm wondering if it might be electric related like the injectors arn't firing becaus of a low battery or something.Another tip. Start the truck and unplug the fuel pump fuse. This will allow the motor to drain the line.