stevencox93
First Fill-Up (of many)
- Location
- Tazewell,Tn
Im doing Raptor Liner too! and why are you putting carpets back in the X?
MAD X - build progress
- Thread starter DC xterra
- Start date
sweet man! im gona give U-POL a call tomorrow to find out all the details, how many gallons will i need and if they sell any UV protective coating so the liner dsnt fade after few years. ill post all the details here.
about the floor its great not to worry about the spills or dirt, i was just thinking about the carpets but i prolly wont put them back in. maybe ill figure out a way to have a flat surface floor or something.
got some new goodies for the truck its like christmas every time a package comes in now!
AC oil filter relocator
AC extended breaklines
B&M SuperCooler Trans Cooler
New Knock Sensor with the Maxima harness for relocation
Dana Spicer U joints
and U-Pol still no response!
AC oil filter relocator
AC extended breaklines
B&M SuperCooler Trans Cooler
New Knock Sensor with the Maxima harness for relocation
Dana Spicer U joints
and U-Pol still no response!
stevencox93
First Fill-Up (of many)
- Location
- Tazewell,Tn
upol has been known for bad customer service. ive researched it over the past like almost 5 months. what are you wanting to know i might could help you
i know sean does and a couple others.
- Location
- Probably in class..
There is a lot of the front of that X missing.
here i got the larger radiator if anyone is interested in the upgrade i think its a great and easy mod
http://www.ebay.com/itm/360465066794?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648
http://www.ebay.com/itm/360465066794?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2648
- Location
- Signal Mtn., TN
- Location
- machesney park IL
Your gonna love those headers decent HP gain and no more cracked manifolds. They are a real pain in the butt to install but worth it. Perhaps because your body lifted it will make it easier to access the bolts.
- Location
- Denver Adjacent
Completely jealous of the headers btw. I have to redo my entire exhaust before the end of July. Hope I can squeeze those in.
Does the new rad have an integrated tranny cooler? Is that why it's listed as "Automatic transmission only?"
Does the new rad have an integrated tranny cooler? Is that why it's listed as "Automatic transmission only?"
my engine is basically apart from the knock sensor so it will be a lot easier to throw in the headers that way, im still looking for the NISMO cat back that i cant find anywhere. and when that radiator comes in i will let you know why does it say only for automatic tran i didn't even see that when a i was buying it heh
- Location
- Denver Adjacent
That's what I thought it was. Most "Automatic Transmission" radiators have a transmission cooler built into them. Myself having a manual, I'd rather have the extra coolant capacity.
ive decided to go with the B&M Tran Cooler instead
on another note my headers are in !! going to tackle that tomorrow,lets see how it goes
fitted the headers today
make sure to get new gaskets
found out i have 3 shot oxygen sensors!
then i started changing my motor mounts, lifted the engine and started with passenger side cause its easier acces hehe. so as im working on it i hear a crack and engine drops like 2 inches down! my driver mount cracked it was kinda scary cause all that was holding my engine at that point was a jack, so i replaced the right side had to align the engine on it it was kinda outta place but i got it.
heres some pics of the new mount and a quick fix of the broken one
make sure to get new gaskets
found out i have 3 shot oxygen sensors!
then i started changing my motor mounts, lifted the engine and started with passenger side cause its easier acces hehe. so as im working on it i hear a crack and engine drops like 2 inches down! my driver mount cracked it was kinda scary cause all that was holding my engine at that point was a jack, so i replaced the right side had to align the engine on it it was kinda outta place but i got it.
heres some pics of the new mount and a quick fix of the broken one
BigTim55
Banned
- Location
- San Antonio
I love headers. One of my favorite mods
Sent from Xavier's School for Gifted Youngsters
Sent from Xavier's School for Gifted Youngsters
- Location
- Signal Mtn., TN
I'd love to have headers one of these days. Nice save on the engine mount.
- Location
- Denver Adjacent
That's a great use of a coke can!!
Headers are definitely next on the list.
Headers are definitely next on the list.
- Location
- Western Massachusetts
I'll be drooling over pics of your rig for days to come.
Feelin' jealous right about now, haha. Great work!
Feelin' jealous right about now, haha. Great work!
hehe thanks! cant wait to have her back on the road
- Location
- Signal Mtn., TN
It's alive!
- Location
- Denver Adjacent
Looking GOOD!
- Location
- Probably in class..
This is awesome. Legal to keep it looking like that? Add some headlights?