CrazySteve911
Need Bigger Tires
- Location
- Loris, SC
It's lost? Thats upsetting.
JK ITS AT MY HOUSE HA HA HA.
JK ITS AT MY HOUSE HA HA HA.
ebay snorkel mod
- Thread starter ff x
- Start date
- Location
- Winlsow Twsp, NJ
Guess what arrived today!!!!!
Jack Stilts
Skid Plates
- Location
- Michigan
Lucky! Mine is still lost in TN 
The seller is sending me a replacement.
The seller is sending me a replacement.
- Location
- Denver Adjacent
Nice!
CaptainMorgan_SOS
Need Bigger Tires
- Location
- Alamogordo, NM
Mine's at the house too, still sitting in it's box.. I REALLY need to go out and get a hole saw!
- Location
- Conroe, TX
Amish.. I have a simple fix for it
I have been waiting to take mine off for paint
While waiting for this simple fix *cough* I installed a K&N Apollo intake system and will be installing a snork soon.
Sent from a Galaxy SIII
FAR FAR
AWAY
- Location
- Winlsow Twsp, NJ
It I had access to a garage or my pole barn (renting the house and the landlord won't give us access) it world be installed tonight lol
sent from the Back Door Assassins
sent from the Back Door Assassins
- Location
- Winlsow Twsp, NJ
I'm doing the grill of the top piece pink as well as the emblems.
sent from the Back Door Assassins
sent from the Back Door Assassins
See that... I need to finish it up but I'm old and lazy...
- Location
- Probably in class..
Why is everyone getting one of these.. I want one more and more.
- Location
- Rochester, NY
x2 I'm jealous
- Location
- Conroe, TX
I eat cheap thus getting a snorkel. :-D
Sent from a Galaxy SIII
FAR FAR
AWAY
Sent from a Galaxy SIII
FAR FAR
AWAY
- Location
- Denver Adjacent
So do it!
- Location
- Winlsow Twsp, NJ
Join the dark side!!!!
sent from the Back Door Assassins
sent from the Back Door Assassins
- Location
- Conroe, TX
Prime, he doesn't eat cheap.
Sent from a Galaxy SIII
FAR FAR
AWAY
Sent from a Galaxy SIII
FAR FAR
AWAY
Jack Stilts
Skid Plates
- Location
- Michigan
Kudos to the seller - after hearing about my shipping woes, he sent out another one free of charge.
I just...want...to snork.
I just...want...to snork.
- Location
- Probably in class..
It's going to happen, I just have other priorities. Timing belt is due and money needs to be placed in other places first. Soon though.
NMTerras
Suspension Lift
- Location
- New Mexico
Hmmm my father in law lives in Australia...can I get a locker cheaper that way when he comes to visit?
/threadjack
/threadjack
- Location
- Denver Adjacent
Check the prices and currency conversions. ARB is HQ'd in Australia. Maybe contact a local reseller there over teh Intarwebs and see if you can do a local pickup or shipping in that country and see if it'll be cheaper. That's a heavy bit of kit to be bringing on an airplane when he comes to visit, but he MIT be able to FedEx or UPS it to you for a reasonable rate.
Check it out. Might be worth it.
Check it out. Might be worth it.
Jack Stilts
Skid Plates
- Location
- Michigan
- Location
- Winlsow Twsp, NJ
Installed! Still need to paint the safari on the fender area later today.
sent from the Back Door Assassins
sent from the Back Door Assassins
Gonna bedline that thing?
u bet i will :kewl:
- Location
- Conroe, TX
Sent Using Tapatalk 4
from a Galaxy SIII
FAR, FAR AWAY
XterraKevin
Bought an X
- Location
- Colorado Springs, Colorado
Ordered mine! But they are having a festival and wont send it till the 13th
chrishaynesusa
Bought an X
- Location
- SJC
I recommend that a black foam piece be inserted between the A pillar mount bracket and the snork.
or that rubber grommets or washers be inserted as well.
THe A-pillar and the fender are on different vibration planes. This may not have been a big issue on gen 1's but they have the same two vibration planes as gen two's.
or that rubber grommets or washers be inserted as well.
THe A-pillar and the fender are on different vibration planes. This may not have been a big issue on gen 1's but they have the same two vibration planes as gen two's.
Last edited:
XterraKevin
Bought an X
- Location
- Colorado Springs, Colorado
Thanks for the heads up
NMTerras
Suspension Lift
- Location
- New Mexico
So far not an issue on my gen 1, Chris Haynes...but probably a good idea as a preventative measure
southernXterra
Bought an X
- Location
- Georgia
Just out of curiosity where did the original poster of this thread get his light bar? I am looking to do a setup similar to it on my gen 1 xterra. I like that you can have roof lights while still being able to fully use the roof rack. I put kayaks and other things on my roof rack that would otherwise knock off the lights if I were to mount them over the wind deflector. So, that light bar hanging out in front of it gives me the ability to still use the roof rack. Definitely interested in buying one if someone can tell me if it will fit my 01 xterra and where I could get it from.
Jack Stilts
Skid Plates
- Location
- Michigan
- Location
- Denver Adjacent
If you can do a good job of cutting the fender for a pipe to come up in the back then I can go either way. I've seen some tragedy DiY snorkels.
The over the counter ones just have a more fit and finished look.
Unless you're Steeze. Then all that **** looks like it was professionally made.
The over the counter ones just have a more fit and finished look.
Unless you're Steeze. Then all that **** looks like it was professionally made.
Yeah Steeze doesn't count. I wasn't necessarily thinking come straight up near the hood/fender split but more of a just make it a smaller section exposed on the fender.
- Location
- Denver Adjacent
I would be interested to see how that would work. Any reference pictures?
I've seen it just looking around on the internet on other 4x4 vehicles. Instead of the hole being really close to the air intake you plumb it farther away before bringing it onto the fender. After that point it looks just like a normal snorkel.