- Location
- Smyrna, TN
I put the Felpro gasket on the passenger side valve cover earlier in the spring. It is already leaking again. Now the driver's side is leaking (OEM gasket). The little grommet/washers that came with it are cracked/broken now as well, and that is causing a leak on the front of the motor.
My goal was to add an intake spacer when I did the driver's side (because the intake has to come off during install), but I don't have the money for one, so I'll need a gasket for the intake, too.
I do not want to use Felpro again. I do not feel like their rubber gaskets are quality. I've used their paper gaskets for years, but this was the first (and last) experience I've had with the rubber.
Suggestions on gaskets? I'm going to have to do the driver's side myself to save money.
My goal was to add an intake spacer when I did the driver's side (because the intake has to come off during install), but I don't have the money for one, so I'll need a gasket for the intake, too.
I do not want to use Felpro again. I do not feel like their rubber gaskets are quality. I've used their paper gaskets for years, but this was the first (and last) experience I've had with the rubber.
Suggestions on gaskets? I'm going to have to do the driver's side myself to save money.