TJM Prolocker Install

Neogixxer Mar 6, 2017

  1. Neogixxer

    Neogixxer Test Drive

    Messages:
    37
    Location:
    Vegas
    So I picked up a TMJ Pro-locker for my 2002 xterra 4x4 that I'm having installed today. My axle is H233B axle with HG49 - 4.9 ratio diff gearing. The Pro-locker is a 33 spline. I'm pretty sure everything will work.

    Just a little concerned cause on the TMJ website, there's no locker for the 2002-2004 xterra but there is one for the 2000- 2001 xterra.

    I'm assuming cause the 2000-2001 is a HG46??? I'm not sure
     
  2. Prime

    Prime Some Kind of In Charge? Admin

    Messages:
    33,099
    Location:
    Suffolk, VA
    The 46 and 49 are simply the gear ratio in the axle. All 99+ hb233b axles are 33 spline inners. So you should be fine. I'm curious though. What kind of locker is it? Lunchbox type? Selectable?
     
  3. JeffPro4x

    JeffPro4x Titan Swapped / SAS'd Moderator Supporting Member

    Messages:
    8,216
    Location:
    Glenside, PA
  4. Prime

    Prime Some Kind of In Charge? Admin

    Messages:
    33,099
    Location:
    Suffolk, VA
  5. JeffPro4x

    JeffPro4x Titan Swapped / SAS'd Moderator Supporting Member

    Messages:
    8,216
    Location:
    Glenside, PA
    Quick Google shows the arb to be about 100-200 cheaper

    sent from a crawlspace...
     
  6. Neogixxer

    Neogixxer Test Drive

    Messages:
    37
    Location:
    Vegas
    Prime, I picked it up for $600 from summit racing cause it was a close out. It was great deal.

    Thanks Prime for the info
     

Share This Page