- Location
- Virginia
Whoops. The new button must’ve skipped ahead or I never finished scrolling last time.
TGPWS 9: The Realm of Weirdness
- Thread starter relentless044
- Start date
- Status
- Location
- Caldwell, ID
I say do it. Nissan support is already low. We can't afford to lose yet another vendor. Even one with shiatty customer service.
If anyone does this, please make the radiator skid not a huge PITA to install / remove!
I was talking to Dave (Maxterra) a while back, maybe a year and a half ago, and he mentioned he'd thought about expanding into making skid plates. I know he's not really active on here, but Rob @IM1RU do you know what Dave's up to lately?
- Location
- Virginia
I can’t remember the name of it, but wasn’t there another vendor that was making skids, stopped, then another company picked up the design? I want to say Shrockworks was the company that picked it up but I may be misremembering.
I took my Shrock radiator skid off for the last time last night finally. Even without the sway bar still a pain.
Yea them
- Location
- Denver Adjacent
I can't remember what company made the armor I had on my 1st Gen. It wasn't Shrock.
- Location
- Allen, Texas
See also: Calmini
RamblinRover
First Fill-Up (of many)
- Location
- Littleton Colorado
So......... it's been awhile .... so much so I couldn't remember my password... seems google is very worried about me requesting a password reset but after some hand holding and talking softly and reassuring google it is ok it finally allowed me to click that ol button. Hope all are well and had good holidays. I'm through the holidays and such and time to get back to the X. So expect stupid questions incoming 
There are no stupid questions, only stupid peopleSo......... it's been awhile .... so much so I couldn't remember my password... seems google is very worried about me requesting a password reset but after some hand holding and talking softly and reassuring google it is ok it finally allowed me to click that ol button. Hope all are well and had good holidays. I'm through the holidays and such and time to get back to the X. So expect stupid questions incoming
- Location
- Covington, Va
This day is DRAGGING by...
- Location
- Hainesville IL
- Location
- Hainesville IL
well damn. the bumpr on my 04 has held up pretty good these past 10-1/2 years.
- Location
- Hainesville IL
heck that bastard ass blue company. they are shiat.
- Location
- Virginia
All the guys that have been around for a while keep asking about “Mike” in regards to Shrockworks. Who is that? The business Shrockworks LLC is registered to a Jim B Shrake and he used his home address to register the business. Street view of that house shows trucks with Shrock bumpers too. If you Google the address one of those people data sites even pops up with Jim’s cell phone number.
Somebody claimed the LLC filed dissolution paperwork in 2018 but I didn’t dig that far to confirm it. I did see Shrockworks LLC took an $85k+ PPP loan in 2020 that was forgiven in 2021. They claimed to have 10 employees. Zoominfo only shows a few employees, which jives with what I’ve read also. They also cleared out their social media. Definitely something weird going on.
Somebody claimed the LLC filed dissolution paperwork in 2018 but I didn’t dig that far to confirm it. I did see Shrockworks LLC took an $85k+ PPP loan in 2020 that was forgiven in 2021. They claimed to have 10 employees. Zoominfo only shows a few employees, which jives with what I’ve read also. They also cleared out their social media. Definitely something weird going on.
- Location
- Hainesville IL
round bois go on the truck monday
- Location
- Allen, Texas
gib bumpr plz
- Location
- Allen, Texas
clean your garage also
- Location
- Ontario Canada
So did the bumper gap
- Location
- Caldwell, ID
Dude. You're not supposed to EAT the toilet paper....
- Location
- Burtonsville, Md
A customer at Jeff's said he hasn't used his winch in 9 year's and now it don't work !!
- Location
- Burtonsville, Md
- Location
- Burtonsville, Md
- Location
- Burtonsville, Md
Saw this while driving today . And yes the driver was Asian . Lol !!
- Location
- Virginia
Was it on a boat?
- Location
- Denver Adjacent
@TheCrabby1 is on a boat.
- Location
- Denver Adjacent
Don't ufck your teeth up.
- Location
- Denver Adjacent
Really a ufcking shame. They had the absolute best 1st Gen UCAs and were the original SAS kit. Back 10 years ago I ordered stuff from them with no issues.
- Location
- Denver Adjacent
Glad to hear from you.So......... it's been awhile .... so much so I couldn't remember my password... seems google is very worried about me requesting a password reset but after some hand holding and talking softly and reassuring google it is ok it finally allowed me to click that ol button. Hope all are well and had good holidays. I'm through the holidays and such and time to get back to the X. So expect stupid questions incoming
- Location
- Denver Adjacent
What's wrong with the rad skid? Mine is bent AF but still bolts up and down with no issues. Is it a problem with the stock bumper?
- Location
- Denver Adjacent
Also, I never take it off to change the oil. Plastic bag trick for life.
Too late
- Location
- Denver Adjacent
Whatchu do?
Modify Shrockworks Rad Skid For Easier Access / Removal?
I had to pull off my Shrock radiator skid this weekend and I had forgotten how annoying it is to remove. The slots on the front to access the lower sway bar busing bolts are only big enough for an extension. You have to find your shallowest socket, and fish it into place. Then, when you...
www.xterranation.org
I have the version shown in this thread, with a stock bumper and front sway bar. It sucks to remove the skid.
- Location
- Denver Adjacent
Wow. That terrible. The version I have the bolts that go behind the Sway bar mounts are on a completely different bracket. That just stays there perminently. Six bolts and the whole thing drops easy.
Derailed_75
Mud Clawson
- Location
- Danville Va
On a boat mother ufcker I got my flippy floppers
Neglect. Pain started Friday, barely slept Sunday or Monday night. Got into a new dentist Tuesday and gave me antibiotics for the infections. Plural. New root canal this morning, have another scheduled in a couple weeks to see why the 12 year old one above it has an abscess.
- Status