TGPWS 10: The Tentacle Invasion

BEEFY

I Smile when Gasoline Can Freeze
Driving a couple hours away tomorrow to pick up a friend's jeep that has been sitting for the last 6 years. 90's TJ on full width 1 tons, a 350 and 38's. Had a bearing in the transmission pile up and he parked it. Life got in the way and he never got it fixed. So dragging it home and pulling the Trans so ge can drop it off for a rebuild. Need to get some of my local wheeling friends back on the road.
 

Edodrian

Lockers Installed
Supporting Member
Location
Nitro, WV
IF, I get this truck bought. I'm know SAS. But I don't like my gear ratio options. Dana 44 gear ratios are 5.13 max for the high pinion. Low pinion goes to 5.38 & 5.89.

The H233B...the only matching ratios are 5.13 and 5.89. 5.13 isn't really enough for 35s. 5.89 is overkill even for 37s. I need 5.38s. But that ratio doesn't exist for the H233B.

So then do I just do a D60/Sterling and say ufck the Hitachi axle? That seems like overkill too.
5.89s were perfect for 37s. Made mine feel like it was stock again.

Won-Ton... yes.
 

Edodrian

Lockers Installed
Supporting Member
Location
Nitro, WV
I need switch options. Saw a picture of the little hole beside the shifter being used for carling switches. Not sure if I can find something for that. Maybe 3d print one out or something since that door is broken to that little area.

Might do one of those 8 bank pads that's got all the relays and such.

I think Spod did one. But I'll find a touch cheaper one.

I don't think I can do the Frontier / Xterra stuff since the pathfinder dash and console are a bit different. Was eyeing putting switches beside the VDC and 4x4 selector.
 

maillet282

If you bleeding, Imma fix you
Moderator
Location
Ontario Canada
I need switch options. Saw a picture of the little hole beside the shifter being used for carling switches. Not sure if I can find something for that. Maybe 3d print one out or something since that door is broken to that little area.

Might do one of those 8 bank pads that's got all the relays and such.

I think Spod did one. But I'll find a touch cheaper one.

I don't think I can do the Frontier / Xterra stuff since the pathfinder dash and console are a bit different. Was eyeing putting switches beside the VDC and 4x4 selector.
I used one of those amazon specials in my silverado. Thinking of upgrading it to the auxbeam ar-800rgb seitch oanel with app, toggle/momentary/puls mode



 

Xterrorista

Charcoal Briquette
Supporting Member
Location
Denton, TX
Did Rock Auto stop with the discount codes? I had a few I was gonna try but went through checkout and never saw a place to add a code..

Any who, front end parts ordered.
 
Top