Stock Switches Types

[metzican]

For the following stock switches list if you know what type they are:
VDC:
Rear Locker:
Clutch Start:
Roof Lights:
Any others I forgotten:


Options
SPST, DPST, SPDT, DPDT or MONO

 

[Prime]

I want a clutch start switch!

 

[metzican]

I will sell you mine!!! Can't you wire one in? just wire a switch to bypass the clutch switch.

 

[Prime]

Probably. I just haven't looked to find the wires yet.

 

[metzican]

Just look down by the clutch near the floor and run a switch off those two wires.

 

[maillet282]

for the locker switch, have you done the locker any time mod? if so I can get you a wire to pin layout ( I did it to my X) if not your going to need an on/off/on ( DPDT if I remember correctly) and for the OR lights, I can also get you the proper wire to pin if you want

 

[maillet282]

here is a thread that I started on TNX about the OR lights, The first post was edited with the switch I was using and the wire to pin layout that ended up working. http://www.thenewx.org/forum/showthread.php?t=65828
here is the how to for the VDC switch
http://www.thenewx.org/forum/showthread.php?t=64267[/URL]
here is a thread for the Diff lock switch
http://www.thenewx.org/forum/showthread.php?t=44403&page=2[/URL]
a thread where I found lots of good info for swapping out the stock switches
http://www.thenewx.org/forum/showthread.php?t=50944[/URL]
if you need any help let me know and I can go take a look at what wires I have going to what pin on the switches http://www.thenewx.org/forum/showthread.php?t=65828

 

[Macland]

Dude, you should copy that into a brand new how to post here. We could always use great info like that here for people to find and ask questions to our member base.

 

[maillet282]

EDIT:
adding a link to a how to that I started. it is still a work in progress but at least it's a start

http://www.xterranation.org/showthr...tches-to-OTRATTW-switches&p=208798#post208798
------------------------------------------------------
I will see what I can do about the copy for a how to now that I am stuck at work for a couple hours

 

[Macland]

EDIT: adding a link to a how to that I started. it is still a work in progress but at least it's a start http://www.xterranation.org/showthread.php?5311-How-To-swap-stock-switches-to-OTRATTW-switches&p=208798#post208798 ------------------------------------------------------ I will see what I can do about the copy for a how to now that I am stuck at work for a couple hours

Rock on dude.

 

[metzican]

Awsome now I just need to get my head wrapped around all this. I don't mind messing with elctricity, I just have not messed with the stock wiring yet. Have not done the locker anytime mod or roof light one yet.