Random Right Pull and Noise

metzican

Suspension Lift
Location
Lafaytte, la
Hopefully I can explain whats going on.

So I am TS. I had no issue with this until I mounted my front bumper and skid plates. But for some reason I think this belongs here.

My X was randomly pulling to the right very hard. I went and got a alignment only a few months after my last one and they said it was way off. So far this fixed this problem.

Next issue since my skid plates and front bumper where installed. When I turn its like i'm getting a rubbing that is random. I checked and its not the fender. I already trimmed them up. It sometimes makes a noise and sometimes I just feel it through the vehicle/steering wheel. I don't see anything it can be rubbing on. I checked all my suspension fasteners and everything is tight and torqued to spec. It happens more at slow speed. I have only noticed it in 2 wheel drive. It also happens in forward and reverse. The steering linkage is not catching on anything that i can tell.

Any Ideas of where to look?

Metzican
 

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
My LCA camber adjustment bolts backed out a bit and threw my alignment off bad after about a year with the lift on my '08. Check the LCA bolts.
 

metzican

Suspension Lift
Location
Lafaytte, la
^^I forgot to update this. I'm pretty sure this is what it was. I think the shop last time when they did my alignment just did not tighten everything down like they should of. This time I double checked.
 

J Everett

Suspension Lift
Founding Member
Location
Houma, LA
You'd think those nylon inserts in the nuts would keep it from backing out. I had mine realigned and requested a touch on loctite on them. I didn't have any trouble after that, but that was only a few months before I traded it in, so I don't know whether it held long term.
 
Top