raingler upper half devider install options

maillet282 Oct 9, 2014

  1. maillet282

    maillet282 Suspension Lift Supporting Member

    Messages:
    4,197
    Location:
    Ontario Canada
    I recently bought a gently used raingler upper haf devider net from somebody on TNX. was installing it this am and started asking myself if people have added footman loops to the C pillar plastic to mount the net instead of having the net angled back to the side roof tied downs. anybody ever done this ?

    if so what did you us to attach the footman loops?
     
  2. drbandkgb

    drbandkgb Titan Swapped / SAS'd Founding Member

    Messages:
    11,187
    Upper half?
     
  3. maillet282

    maillet282 Suspension Lift Supporting Member

    Messages:
    4,197
    Location:
    Ontario Canada
    also known as the half net divider, it's the smaller of the nets that divide the cargo area from where the seats are
     
  4. metzican

    metzican Suspension Lift

    Messages:
    2,729
    Location:
    Lafaytte, la
    I remember seeing someone who installed the footman loops but I don't recall if it was for behind the driver or behind the back seat. I would Remove the plastic and make sure there is nothing behind it and then install the footman to the metal. This would be much stronger then to the plastic. Since I don't feel like doing this work I just did it the way you did.
     
  5. Macland

    Macland Titan Swapped / SAS'd Founding Member

    Messages:
    10,410
    Location:
    SW OK & formerly Eastern NM
    It has been done and imo it's not worth the trouble. You have to add a piece of pvc pipe between the plastic and the metal of the a-pillar and then a long screw. I've had my net up for quite a while without the footman loops and can't complain. I will complain that the plastic on the a-pillar never went back to normal haha.
     

Share This Page