Intender
Wheeling
- Location
- Lewisville NC
I bought a used rear axle with an arb locker already installed a few months ago and have been looking into getting the stuff together to install everything sometime in the next couple of months. I am just going to swap the third member from the old axle into mine so I dont need to worry about actuallly installing the locker. However I am having a hard time finding a list of things that came with the locker. obviously I need a solenoid, a switch, and an air line. I have found the solenoid and switch on amazon, and the arb air line is available from 4x4parts. Is there anything else in the kit that I need. And should I buy all arb stuff, or are there cheaper alternatives that I can trust not to break on me.
I have an air supply mounted in the back hatch area, a 6 port manifold, and a regulator (140psi I think) for connecting to an air tank, but the only thing hooked up right now is the compressor. I will eventually put an air tank in where the spare tire used to be, but for the time being I plan on just hooking the compressor to the locker.
I have an air supply mounted in the back hatch area, a 6 port manifold, and a regulator (140psi I think) for connecting to an air tank, but the only thing hooked up right now is the compressor. I will eventually put an air tank in where the spare tire used to be, but for the time being I plan on just hooking the compressor to the locker.