This is a How to replace Front 6.5 speakers. Also could be used to tweeters also (1")
Take this off left piece of elbow rest.
Take this out. under elbow rest
In elbow rest
In door opener
A pillar clip. used a flat head to help get it off.
After those are off the piece around the door handle needs to come off. Be careful when taking it off it breaks EASY! I used a flat head to help pry it off.
Then slowly undo the edge clips.
Take off harness for door lock / windows. Use flat head if needed.
Driver side has one harness.
Passenger has two brown(door lock) white(window)
Speaker has 4 screws in it. take them out
this was the harness that was on it.
The speakers i bought didn't accept the harness so i had to cut and crimp.
Driver side - black / white = negative Blue = Pos
Passenger - red / black = negative Brown = postive
Hook up speaker, and TEST then screw in speaker if it works
Then reverse it all and put it back on. when putting on the panel you have to make sure you go from top to bottom or it won't sit correctly. For whatever speakers you are buying check the plug in play. See if it will accept the harness if not stop and get some connectors real quick.
For those of you that want to do tweeters. It the same as the speakers a funky harness that probably won't be accepted by another speaker so you will have to cut / connect it. but this is what it looks like. its literally only a 1" and limited to replacement unless you want to modify the mounting on it.
Happy Raging!
Take this off left piece of elbow rest.
Take this out. under elbow rest
In elbow rest
In door opener
A pillar clip. used a flat head to help get it off.
After those are off the piece around the door handle needs to come off. Be careful when taking it off it breaks EASY! I used a flat head to help pry it off.
Then slowly undo the edge clips.
Take off harness for door lock / windows. Use flat head if needed.
Driver side has one harness.
Passenger has two brown(door lock) white(window)
Speaker has 4 screws in it. take them out
this was the harness that was on it.
The speakers i bought didn't accept the harness so i had to cut and crimp.
Driver side - black / white = negative Blue = Pos
Passenger - red / black = negative Brown = postive
Hook up speaker, and TEST then screw in speaker if it works
Then reverse it all and put it back on. when putting on the panel you have to make sure you go from top to bottom or it won't sit correctly. For whatever speakers you are buying check the plug in play. See if it will accept the harness if not stop and get some connectors real quick.
For those of you that want to do tweeters. It the same as the speakers a funky harness that probably won't be accepted by another speaker so you will have to cut / connect it. but this is what it looks like. its literally only a 1" and limited to replacement unless you want to modify the mounting on it.
Happy Raging!