Gears & CVs

[sirulrik11]

Going to 35s on my 11X and need to know who has aftermarket gears. Planning on going to 4:10 ratio I think. Also are the front CV axels the same length on both sides? Want to get a spare set to carry just in case, figure good insurance with running that big a tire. Any info would be helpful on the gear thing. Thanx CJ

 

[05x4x4]

Rugged rocks for the gears, yes 4.10's for 35" tires.

CV's are the same for both sides.


Sent from my iPhone4 using Tapatalk

 

[metzican]

^^ What he said. 4.10's for 35" tires order from Rugged rocks. CV's are the same. I use to carry 1 spare due to this.

 

[sirulrik11]

Thanx for the info guys, Guess its time to order me some new gears

 

[sirulrik11]

Gears

Looked on Ruggedrocks for gears. Found the 4:10 for the rear but doesn't show a front? Has a front for the titan, will this work?

 

[civicjoe]

Looked on Ruggedrocks for gears. Found the 4:10 for the rear but doesn't show a front? Has a front for the titan, will this work?

My understanding is.
RR has 4.10 for the m226 idk about the c200 however he does not carry the 4.10 for the front r180, but has it for the m205 titan front diff. So if you are T Swapping you can get the 4.10 front. However AC carries at 4.10 for the r180 but it needs some kind of adapter and some shops wont do that install for you because of failures i believe. You best bet is to contact steevo at RR and he can get you all squared away.

 

[05x4x4]

^^ just call steevo, they didn't have what I needed posted and he took the time to sort out all the details, a week later I had parts showing up.


Sent from my iPhone4 using Tapatalk