Fender cutting with spacers

[Fromfrontier2Xterra]

I've been debating doing 2" wheel spacers on all four corners. I'm currently running Firestone Destination A/T 285/75/16's. Which are technically just below 33's. I did do the melt mod just in case. Suspension wise I'm running readylift spacers in front and 2.5" PRG AAL in rear.

With running the spacers, do the fenders always need to be trimmed or is this on a case by case basis?

 

[metzican]

I have not ran this setup but I would say there is a 90% chance that your going to have to cut the fenders. We would not run into this problem if we did not have to steer.

 

[Rammer'sX]

With 33 and 1.5" spacers after the melt mod tires were still rubbing in the inner fender at 3/4 if the turn, so I would guess that witg 2" spacers you will need to trim some fender

Sent from my HTC One_M8 using Tapatalk

 

[Fromfrontier2Xterra]

Hmmm. Thanks guys. I think I'm gonna hold off. Love the looks but can't justify cutting into a '13 yet.