Chasema
Test Drive
- Location
- Ellensburg, Wa
Hi everyone, I've been a lurker for a while. I have a 2001 x with just a pml and 32" mudterrains and my drivers side drive axle is toast. I picked up a new one but my jacks and jack stands don't lift high enough to reach the frame rails ( I came from lowered subaru's).
My Question is, can I just turn the wheel all the way over to one side, unbolt the hub and the axle from the diff and slide it out that way or am I going to have to lift the whole thing and remove the tire, steering and upper control arm like the manual calls for ( I would prefer to not do it that way if possible..). Thanks!
My Question is, can I just turn the wheel all the way over to one side, unbolt the hub and the axle from the diff and slide it out that way or am I going to have to lift the whole thing and remove the tire, steering and upper control arm like the manual calls for ( I would prefer to not do it that way if possible..). Thanks!