Axxess - ASWC-1 IssuesI

[metzican]

I'm going to try to cover all things right away.

I have a 2011 Pro-4x, So I installed a Pioneer AVH P2400BT. I tried to install axxess - aswc-1 to get the steering wheel controls working. The issue is trying to get the axxess to detect the proper settings. I go through the auto connect. It detects the radio but not the wire that it should of. It did not detect any wires. I have taken it apart 3 times now to double check the wiring. Anyone see anything wrong with my wiring? or Know how to solve this issue?

Here are some pictures of the wires used

SWC wire 1 and 2 (Pin 5 Gray/Red on Axxess to Pin 4 Violet on Vehicle) & (Pin 2 White/Green on Axxess to Pin 12 Lt Green on Vehicle)


SWC Ground wire (Pin 3 on Vehicle Orange to Ground)


Install instructions for my vehicle.
http://contentdocs.installernet.com/documents/vehicle/10979.pdf

Manual
[URL="http://contentdocs.installernet.com//documents/product/34201.pdf"]http://contentdocs.installernet.com//documents/product/34201.pdf




[/URL]

 

[metzican]

This thread can be deleted. I figured it out. It was not the wiring. I did not know I had to hold down the volume up bottom the whole time.