Xterra Repair and recovery( collection parts)

maillet282 May 21, 2018

  1. maillet282

    maillet282 Suspension Lift Supporting Member

    Messages:
    4,424
    Location:
    Ontario Canada
    Situation:
    A buddy of mine just sent me this pic and is asking for some help
    FCF163A8-2C54-4F0F-BF8E-2063C2887C77.png

    Phase 1:he sent that pic to his mechanic and is waiting for parts. But at the same time he wanted my opinion

    Recommending he brings with him :
    -new BJ/ or UCA not sure what ones he has on
    -new brake flex hose
    -new wheel speed sensor/ hub ( not sure on what he can get his hands on)
    -going to lend him a trail spare CV shaft just in case he destroyed something in there
    -fluids( brake, diff,)

    My questions are what else besides the list above could we need to get this thing home to fix it
     
  2. Prime

    Prime Some Kind of In Charge? Admin

    Messages:
    34,382
    Location:
    Denver-ish
    It looks like it needs an upper control arm as the ball joint is what came apart. But parts wise, I think you've got it covered.
     
  3. thecoalition

    thecoalition Call me Daddy Super Moderator Supporting Member

    Messages:
    6,996
    Location:
    Richmond, Va
    I would bring spare inner and outer tie rod just in case they got bent
     
  4. maillet282

    maillet282 Suspension Lift Supporting Member

    Messages:
    4,424
    Location:
    Ontario Canada
    First in the list new BJ or UCA
     
  5. maillet282

    maillet282 Suspension Lift Supporting Member

    Messages:
    4,424
    Location:
    Ontario Canada
    Ok will recommend. Those. Thanks
     
  6. Muadeeb

    Muadeeb Bastard Admin from Hell Admin

    Messages:
    15,911
    Location:
    Dallas
    CV is probably OK, but worth a mention.
     
  7. maillet282

    maillet282 Suspension Lift Supporting Member

    Messages:
    4,424
    Location:
    Ontario Canada
    So the guy that this happened to took all of these recommendations and ordered his parts. He is going to be using his old stock UCA he took off a couple years ago and replace the broken SPC one as a temp fix until he can get a new BJ for it.

    Also he is going to attempt to go do his trail fix today at some point and will let me know how it went. Unfortunately work has sent me away and I am unable to help him with this fix. I will post up with what he sends me. I have also sent him the link to this forum for his references for future x questions
     

Share This Page