1. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    Hi guys I'm a new Xterra owner and have recently been buying parts xterras and now I have a boneyard of about 22 xterras and am pulling and shipping out oem used parts! From late 90s to 2006!
     
  2. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Good to know! I just bought an 03. Would you happen to have a cargo net that fits the hooks in the back?
     
  3. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    I took the best one and built it from parts out there and that's the one in the picture of my profile! And yes I have 7 cargo nets 2 grey, 2 tan and 3 black
     
  4. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Nice! How much for the net, with shipping?
     
  5. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    Id probably say $5 or $10 for the net and no more than a few bucks for shipping!
     
  6. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Sold! I'll take a tan one!
     
  7. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    Ok I'll message you this week for the address and name to ship too!
     
  8. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Woot!
     
  9. Richard

    Richard Bought an X

    Messages:
    52
    Location:
    Oregon
    I would like a gray please.
     
  10. BCXterra

    BCXterra Bought an X

    Messages:
    57
    I would like a black one please.

    PM me details to purchase please.
     
  11. Xterrorista

    Xterrorista Need Bigger Tires Supporting Member

    Messages:
    611
    Location:
    Aurora, CO
    I'll take a black one too, please!
     
  12. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    Ok guys I'll get back with you later this week I'm backed up removing parts!
     
    reaver likes this.
  13. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Sounds great man!

    Do you happen to have any aftermarket skids, lift ucas, or idler Arm braces on those rigs as well?
     
  14. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    I have one that has 3" lift blocks and two with the idler arm braces!
     
  15. BCXterra

    BCXterra Bought an X

    Messages:
    57
    Would like one of those braces too please. Price?
     
  16. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    2" lift blocks is the most I'd want. I will take an idler Arm brace though!

    There's a bunch of us who are gonna pick these trucks clean. Lol.
     
  17. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    I'll have to see what'd it cost me to ship it but can't imagine it being that much! I'd say prolly $20 tops
     
  18. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    And I'm ok with that the cleaner they can be picked I can get them cut up and sent to scrap to appease the wife...lol my Xterra habit is starting to irritate her
     
  19. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Haha. Yeah, nobody likes an unhappy wife. Lol.

    So no aftermarket lift ucas?
     
  20. BCXterra

    BCXterra Bought an X

    Messages:
    57
    You can cut the blocks easily enough. I used to run a 1.5” lift on my 4Runner, made it by cutting down a 3” kit.
     
  21. BCXterra

    BCXterra Bought an X

    Messages:
    57
    Great.
     
  22. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    Ucas? Upper control arms?
     
  23. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    I have one with aftermarket bolt on ball joints and lifted control arms that's tubular but the bushings for the frame side are shot!
     
  24. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Yup. Looking for 3" lift upper control arms.
     
  25. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    I can buy new bushings. 4x4parts ucas are 400 new, so if I can get them used, and cheaper, I'll take them.
     
  26. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    I don't know how much these control arms lift it the bolt on ball joint is sitting at less of an angle and down farther than an oem control arm I will post a pic after bit
     
  27. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    Basically, I want to run a 3" suspension lift. Ucas in the front, and shackles and add a leaf in the rear. 2" body lift to clear 33s. Any parts you have that can facilitate that, I'll take!
     
  28. Silver03offroadxterra

    Silver03offroadxterra Test Drive

    Messages:
    22
    Okey dokey i i ha the upper control arms and I have some leaf brackets that push the leafs down about 3" I'll post pics and message after bit
     
    reaver likes this.
  29. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    No rush man! I appreciate it though!
     
  30. RxnNic66

    RxnNic66 Bought an X

    Messages:
    149
    Location:
    TX
    I need an intake plenum for a 1st gen. Mine is cracked and leaks out coolant QUICKLY. Got plenum?
     
  31. reaver

    reaver Bought an X

    Messages:
    95
    Location:
    Caldwell, ID
    I know I said no rush, but I'm just curious if you have an update for us yet? Appreciate it man!
     

Share This Page