UCA clunking

[Jonah]

Hey guys, I have a 2006 xterra off-road, I noticed a clunking noise coming from the driver side front upper control arm the other day. The bushing looks like it threads into the actual control arm but I’m not sure who the manufacturer is. Anyone know any after market suspension companies that would have adjustable UCA? My bushing is bad and I need to replace it without buying the entire UCA

 

[jsexton]

Those look like PRG arms.

I have the PRG Titan arms and used these to replace them.
American Star 4130 Chromoly 3/4 Inch XMR12 Rod Ends/Heim Joints (Set Of 2)
They are probably the same as yours, but measure first to make sure.

 

[Jonah]

I’ll try them and hopefully they’ll work, thank you!

 

[Snagger]

Looks like this might be a good option for you: https://www.prgproducts.com/product-page/prg-frontier-xterra-rev-1-rebuild-kit, you could rebuild the whole upper control arm.

I have replaced the outer bearings on mine. That is where mine was clunking and making a horrible squeaking. I do a better job keeping them lubed up now.

 

[jsexton]

Looks like this might be a good option for you: https://www.prgproducts.com/product-page/prg-frontier-xterra-rev-1-rebuild-kit, you could rebuild the whole upper control arm.

I have replaced the outer bearings on mine. That is where mine was clunking and making a horrible squeaking. I do a better job keeping them lubed up now.

That’s the expensive route. You are way better off sourcing the uniballs and heims yourself.