- Location
- Covington, Va
Not sure about flag mount. No antenna mount though.Looks awesome. Did you get the antenna and flag mount too? And did you request he leave out the recessed reverse lights?
Not sure about flag mount. No antenna mount though.Looks awesome. Did you get the antenna and flag mount too? And did you request he leave out the recessed reverse lights?
You should paint those steelies black man. Would look good.
I don't have the interest to keep up with them after I paint them honestly. If I chip one or scratch it really bad or even have to replace one, then I have to go back through that process and I hate tedious stuff like painting.You should paint those steelies black man. Would look good.
That's fair, and I can't say I blame you.I don't have the interest to keep up with them after I paint them honestly. If I chip one or scratch it really bad or even have to replace one, then I have to go back through that process and I hate tedious stuff like painting.
R you sure there's not stitches' under that band-aid ?
I told you I'd lost interest. Haha
Fair enough.I told you I'd lost interest. Haha
Installed my Frontrunner table from @12° North Industries this evening. Got some HDPE on the way to replace the wooden extension since this table is meant to be installed inside a Jeep.
View attachment 21770
Send me one! I love stickers!OOohhh I see a spot that could use a decal too.. lol : )
- Elena
Do you already have the brackets those would connect to? If so I have that exact thing on the shelf in the garage you can have free. And two types of bulbs for them. I had to keep the bracket for the SS3s though.My wife ordered a turn signal switch with the fog light switch. Now I need to pick some fog lights....
Thinking about these. Apparently made by Nissan.
My bumper doesn't use the brackets. The lamps bolt directly into the bumper.Do you already have the brackets those would connect to? If so I have that exact thing on the shelf in the garage you can have free. And two types of bulbs for them. I had to keep the bracket for the SS3s though.
That's what they claim. Look like Morimoto. I didn't know there was an OE LED fog.My bumper doesn't use the brackets. The lamps bolt directly into the bumper.
These are OEM Nissan LED foglights?
I didn't either till I found that and looked up the part #. Apparently they're for later Titans but use the same mounts as Xterra and Frontiers.That's what they claim. Look like Morimoto. I didn't know there was an OE LED fog.
Did you find a cross reference to a Nissan part number?I didn't either till I found that and looked up the part #. Apparently they're for later Titans but use the same mounts as Xterra and Frontiers.
Mine were originally from Nissan Parts Puller. I can try to remember to grab pics tomorrow.My bumper doesn't use the brackets. The lamps bolt directly into the bumper.
These are OEM Nissan LED foglights?
I actually set it up to go behind the carrier to make it more compact around camp and it also works with my pull out trays in my drawer set so that I wind up with a lot of "counter" space back there when it's all open.Thanks for the Mention of us @TerryD
Personally a little jelly I dont have a swing out feature to use one myself on my rig right now. I do believe that the table portion (wood piece) can switch sides too if you wanted to keep food prep away from fuel cans at later date.
Be excited to see it in real use soon, don't forget to tag us on at least your first adventure and using it..! ; )
- Elena
Are those OE ones sealed? The #1 reason I bought the SS3 kit to replace mine was every time I crossed a stream I got water in the fog light. Even after putting silicone around the seat of the bulb I did. Then because the bulbs were LED they didn’t crank out enough heat to quickly burn off the moisture.My Fog Light equipped turn signal switch arrived today. Quick 15min job to install it.
View attachment 21998
No to figure out lights. The cheap-@$$ in me says get @ffxcores lamps. The other part of me wants those OE Nissan LEDs.....
I don't know if they are sealed or not but I would hope they are. I like the thought of OE LED because they will be more attentive to RF radiation then most after market.Are those OE ones sealed? The #1 reason I bought the SS3 kit to replace mine was every time I crossed a stream I got water in the fog light. Even after putting silicone around the seat of the bulb I did. Then because the bulbs were LED they didn’t crank out enough heat to quickly burn off the moisture.
I'd buy the OE ones. Do that and let me know what color temp they are.I don't know if they are sealed or not but I would hope they are. I like the thought of OE LED because they will be more attentive to RF radiation then most after market.
That's the direction I'm leaning.I'd buy the OE ones. Do that and let me know what color temp they are.
Well ?????? we're waiting !!
I didnt notice the video either, we aint diode dynamics rich, we needed yay or nay hahaVideo posted. What more you want?
I'm not either. These are OE LEDs from a 2017+ Titan.I didnt notice the video either, we aint diode dynamics rich, we needed yay or nay haha
Looks solid, ı might get me a pairI don't know man. They're very white compared to my halogen headlights. You can pretty easily see the cutoff. And how much light they throw onto the sides of the road.
View attachment 22209
OK. I'm sold. Plug-n-Play I assume?I don't know man. They're very white compared to my halogen headlights. You can pretty easily see the cutoff. And how much light they throw onto the sides of the road.
View attachment 22209