Problem installing 2.5 Dual AAL

[on_that_rayray]

I'm trying to install some 2.5 dual AAL's for my 08 Xterra, I'm having trouble fitting all the leaf springs into the shackles on the Dual AAL. Any help is appreciated!

 

[TheFauxFox]

Confused about your problem. Picture or more explanation on the proceedure you are taking.

 

[on_that_rayray]

I'm basically confused about how to install the dual AAL's, the bolt in the Dual AAL's is going up through the Leaf springs, but for the stock ones the bolt is going down through the stock leaf springs. Does that make any sense? ill upload pictures in the morning

 

[Fixitguy]

Take the bolt out, run it down through your leaf pack and through the AAL.
C-Clamps help keep everything aligned and assist with tension.

 

[on_that_rayray]

Take the bolt out, run it down through your leaf pack and through the AAL.
C-Clamps help keep everything aligned and assist with tension.

Thank you!! Do you know what I mean when I say the shackle looking things on the end of the AAL? I can't get them to fit around the stock leafs!

 

[TheFauxFox]

You can take those shackles apart normally

 

[on_that_rayray]

You can take those shackles apart normally

Do you re-assemble them? or can you just leave them off?

 

[TheFauxFox]

You reassemble them. Remove the overload (flat) spring too.

It should just be like a 2-piece lift shackle.

 

[on_that_rayray]

Will do! I'll give that a try this week! Thanks for the help ya'll!