No Power

ymbhonk

ymbhonk

First Fill-Up (of many)
Location
Puyallup, WA
So I wired my roof lights yesterday and last night I had no power at all at the ignition.

So far I've checked all the fuses and ha the battery. No issues from what I can find.

Any ideas?
 
Roadwarrior

Roadwarrior

Titan Swapped / SAS'd
Founding Member
Location
Probably in class..
Sounds like no ground.. Could be no power.. I know that's what your title is.. But where are you pulling your power from?

Sent from somewhere by something
 
ymbhonk

ymbhonk

First Fill-Up (of many)
Location
Puyallup, WA
No power in the vehicle at all. Lights were working fine. Later with the key in the ignition there was no power to the X at all

Thought it was a bad battery but a jump didn't work and the battery tested at 100%

It may be the main fusible link right off the battery but I can't see one that's busted
ImageUploadedByTapatalk1343072913.619202.jpg
 
ymbhonk

ymbhonk

First Fill-Up (of many)
Location
Puyallup, WA
Lights are grounded tithe Lo Pro Lightbar.

Relays are grounded to the drivers side fender.

Switches are grounded to the inside fender by the firewall.
 
Deltaphi216

Deltaphi216

First Fill-Up (of many)
Founding Member
Location
STL
did you check that 140a fusible link? i bet that's the problem grab a multimeter and check continuity across it.
 
ymbhonk

ymbhonk

First Fill-Up (of many)
Location
Puyallup, WA
Problem solved. Sprayed down and scrubbed all the connections on the fusible link and put it back together. Worked like a charm.
 
idratherbe

idratherbe

Skid Plates
Location
North Shore, MA
A voltmeter or test light is a cheap tool to have that really comes in handy when trying to diagnose things like this. I highly recommend everyone have one. You don't have to spend a fortune either. I use my $10 one more then my $300 Fluke.
 
You must log in or register to reply here.
Top