Ignition Distributor

1stGENXterra Mar 22, 2018

  1. 1stGENXterra

    1stGENXterra Test Drive

    Messages:
    38
    Hey XN!! ANY advice on which distributor to buy? 00 X 3.3l

    Thanks
     
  2. Cptpackrat

    Cptpackrat Need Bigger Tires Supporting Member

    Messages:
    741
    Location:
    Gillette WY
    The best option is OEM if you can find one. If not it is really pretty easy to rebuild your own with a new bearing.
     
  3. 1stGENXterra

    1stGENXterra Test Drive

    Messages:
    38
    I'm trying to track down a misfire in cyl. 2. I had it (p0302) awhile back. Did the plugs, wires, cap n rotor. Went away. It's back lol.
    When you say "build your own" what does that take? Just the bearing?
    Thanks
     
  4. Muadeeb

    Muadeeb Bastard Admin from Hell Admin

    Messages:
    15,441
    Location:
    Dallas
    Yes. If you have any lateral play in the rotor, then the bearing needs to be replaced. It is not an uncommon size (Not sure what it is off top of head), and can be pressed out without difficulty.
     
    1stGENXterra likes this.
  5. 1stGENXterra

    1stGENXterra Test Drive

    Messages:
    38
    I will have to check into that. Thank you, anyone have a P/N off hand?
     
  6. Cptpackrat

    Cptpackrat Need Bigger Tires Supporting Member

    Messages:
    741
    Location:
    Gillette WY
    1stGENXterra likes this.
  7. 1stGENXterra

    1stGENXterra Test Drive

    Messages:
    38

    Right on, thanks. Lol I would write it up but others do far better.
     
    Cptpackrat likes this.
  8. Prime

    Prime Some Kind of In Charge? Admin

    Messages:
    32,714
    Location:
    Suffolk, VA
    Or you could do it anyway. Because we always need new write ups here.
     

Share This Page