Assistance on XD Heist Fitment

Devon Aug 31, 2019

  1. Devon

    Devon Test Drive

    Messages:
    10
    Location:
    Tyler, Texas
    hey guys, I’ve had the KMC XD 818 Heists milled wheels in my sites since I got my X back in 2017 and havent been able to attain them until recently and now I am concerned they won’t fit or what is even considered the proper and most suitable fitting size. 16x8 6-114.30 with a 10mm offset is what I plan on getting but when I went into Discount Tire they said 8.5 would be the best fit. I’m also having a difficult time making sure that the milled version(not the matte black) is even made in that size. I think 114.3 is the equivalent of the 4.5 in a 6x4.5 measurement. I just wanted to see if anyone knew on this matter and whether they knew these exact KMC XD wheels would fit. They are 265/75r16 on a 4x4 2011 X. If y’all have any ideas on this or knowledge it would be much appreciated, thanks!!!
     
  2. Just a Hunter

    Just a Hunter Test Drive

    Messages:
    49
    Location:
    Georgia
    The stock wheel size for a 2014 Xterra S is 16" x 7" with a 6 x 4.5" bolt pattern and a 30mm offset.

    Edit: I was told the factory backspacing on our rims are apx 5.5 inches.
    I'm not sure if this is a standard measurement between all xterrra models .
    Re: Would this be the same for X, S, Off-Road and Pro4X ?

    Ps, dont confuse offset with back spacing.
     
    Last edited: Aug 31, 2019
    Devon likes this.
  3. jsexton

    jsexton First Fill-Up (of many) Supporting Member

    Messages:
    312
    Location:
    Lewis Center, OH
    The stock wheel being 16 x 7 with a +30mm offset is accurate. It’s stamped in the wheel.

    The 5.5” backspacing is not. That seems to be a common misconception around here.

    Both my math based off the 30 mm offset and the tape measure confirm it is under 5 1/4” backspacing. More like 5 3/16”

    [​IMG]

    [​IMG]

    [​IMG]
     
    Devon likes this.
  4. Devon

    Devon Test Drive

    Messages:
    10
    Location:
    Tyler, Texas
    I have a 2011 X model though I have never had any other rims besides the stock ones on my X. I thought the X models came stock with 16x8 or 16x8.5 6-114.3 with a 0mm offset as most wheels that you even try to get for this model of the X all have the same measurements for example the Level 8 MK6 wheels and those Warrior wheels. Back spacing isn’t even my concern on these wheels it’s just whether or not these actually fit since they have a 4.5” measurement.
     
  5. jsexton

    jsexton First Fill-Up (of many) Supporting Member

    Messages:
    312
    Location:
    Lewis Center, OH
    All of the 16” wheels on a second gen have the same specs.

    I can’t remember if it was the Xterra or pathfinder 17’s that were slightly different. I believe those were 7.5” wide. It’s possible that’s where the 5.5” backspacing came from.
     
    Devon likes this.

Share This Page