ddddddd
Bought an X
- Location
- los angeles
Hello,
My clutch will hit the floor and not return, stalling the car. I added more fluid, and it was fine. Slowly it leaked back out. Rinse n' Repeat. Now, after about 4 weeks dealing with this, the clutch doesn't fully engage even when full of fluid. Seems like not enough pressure.
1. How can I troubleshoot this to find root cause?
2. How hard is the repair if I end up needing a new master or slave cylinder? I have done the timing belt + other goodies, so rate it on a scale relative to that repair.
EDIT: I should have said that I am on my second master cylinder. OEM one went bad at about 80K, got a new one (non-OEM) and has been great since then. I'm at 140K now.
Thanks guys & gals I really appreciate your help.
-Drew
My clutch will hit the floor and not return, stalling the car. I added more fluid, and it was fine. Slowly it leaked back out. Rinse n' Repeat. Now, after about 4 weeks dealing with this, the clutch doesn't fully engage even when full of fluid. Seems like not enough pressure.
1. How can I troubleshoot this to find root cause?
2. How hard is the repair if I end up needing a new master or slave cylinder? I have done the timing belt + other goodies, so rate it on a scale relative to that repair.
EDIT: I should have said that I am on my second master cylinder. OEM one went bad at about 80K, got a new one (non-OEM) and has been great since then. I'm at 140K now.
Thanks guys & gals I really appreciate your help.
-Drew