clutch

I need some second thoughts on this draining situation, I originally started a clutch project to replace the clutch and pressure plate and went through the whole process of taking out the transmission. While I was back there I took off the flywheel and did the rear main seal. after that I bolted...

Started getting some slippage and decided the clutch is going.. Its got 60k on it and while I've read it isn't crazy to have to replace at that point, I do, at least in part, blame a stupid thing I did a couple years ago that burnt the clutch up really bad... Anyway, I talked with a shop and...

This is how I flushed my Brake fluid on a 2011 with a manual transmission, and while it's likely this holds the same for all 2nd Gen's you will have to confirm your individual applications. Also note this is the way I did it and not necessarily the best way, use at your own risk. I did attempt...